Independent technical referenceOfficial site
  • Appliances
  • Dishwashers

E16

Balay E16 on a dishwasher: water keeps flowing in

Verified with sources1 sourceReviewed Oct 3, 2026
Technician coming? See the 2 steps they must show you
Open dishwasher showing its racks
Yelderberry (talk)CC BY-SA 4.0Image source

Risk level

High

Professional inspection is recommended.

Urgency

High

Quick answer

The dishwasher detects that water keeps coming in. First close the water inlet tap, as Balay instructs, then contact Balay's official service. Do not leave it running.

Safety first

Stop and check this first

  • With E16 water can keep entering after the programme ends: do not leave home with the dishwasher's tap open.

Safe checks you can perform

  • Inlet tap closed
  • Appliance off, unplugged and no water on the floor
  • Code, model and serial number recorded

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Check the inlet valve
  • Do not attempt this professional task: Check fill control and level detection

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Check the inlet valve

    What they doThe technician measures the valve coil and checks whether it closes without power, with a multimeter and the tap opened under control.

    They must show youthe measured value against the specification and whether water passes with the valve unpowered.

    In writingthe result and the part replaced.

  2. Check fill control and level detection

    What they doIf the valve closes correctly, the technician checks what the board commands and whether level detection responds.

    They must show youa fill test that stops correctly after the repair.

    In writingpart number and the reason.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. Inlet tap closed

    No special tools

    Who:
    you.
    How:
    close the valve that feeds the dishwasher before anything else.
    Result that matters:
    stopping water from coming in.
    If you no longer hear water entering:
    it came from the supply; keep the tap closed until the visit.
    If you still hear water or see it escaping:
    close the home's main water valve.
    Evidence to keep:
    photo of the closed valve and the time.

    Evidence: Balay España códigos de error del lavavajillas

  2. Appliance off, unplugged and no water on the floor

    No special tools

    Who:
    you.
    How:
    switch off and unplug the dishwasher and check the floor and sink cabinet without removing anything.
    Result that matters:
    that no water is escaping from the appliance.
    If there is water outside:
    dry it and tell the technician.
    If there is none:
    do not reopen the tap to test; leave the diagnosis to the technician.
    Evidence to keep:
    photos of the floor and cabinet.

    Evidence: Balay España códigos de error del lavavajillas

  3. Code, model and serial number recorded

    No special tools

    Who:
    you.
    How:
    photograph the code on the display and the dishwasher's rating plate (model and serial number; on many models it is visible when the door is open).
    Result that matters:
    that the technician gets the exact code and model before the visit.
    If the same code returns after the previous check:
    you already have the proof for Balay's official service.
    If a different code appears:
    note it too; it points to a different page.
    Evidence to keep:
    dated photo of the code and photo of the rating plate.

    Evidence: Balay España códigos de error del lavavajillas

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Appliances
Brand
Balay
Product type
Dishwashers

Known code variants

  • aerotermia Viessmann E16
  • Balay dishwasher E16
  • Balay E16
  • Balay E16 error washer
  • Balay E16 lavadora
  • Balay washer E16 door
  • Balay washing machine E16
  • Bosch dishwasher E16
  • Bosch E16
  • Bosch E16 error
  • Bosch E16 lavavajillas
  • Bosch Geschirrspüler Fehler E16
  • code erreur E16 lave-vaisselle Bosch
  • code erreur E16 lave-vaisselle Siemens
  • codice E16 Bosch
  • codice E16 Siemens
  • código E16 Bosch
  • código E16 Siemens
  • E16
  • E16 Bosch dishwasher
  • E16 lavavajillas Balay
  • E16 Siemens dishwasher
  • E:16
  • erreur E16 Bosch
  • erreur E16 Siemens
  • Error E16 Balay
  • error E16 lavadora Balay
  • error E16 lavavajillas Bosch
  • error E16 lavavajillas Siemens
  • errore E16 lavastoviglie Bosch
  • errore E16 lavastoviglie Siemens
  • F16
  • F:16
  • Fehlercode E16 Bosch
  • Fehlercode E16 Siemens
  • lavadora Balay E16 puerta
  • Siemens dishwasher E16
  • Siemens E16
  • Siemens Geschirrspüler Fehler E16
  • Viessmann air to water E16
  • Viessmann bomba de calor E16
  • Viessmann E16
  • Viessmann heat pump E16
  • Viessmann Vitocal 100-AW E16
  • Vitocal 100-AW AM2V E16
  • Vitocal baja presión E16
  • Vitocal E16
  • Vitocal E16 low pressure
  • Vitocal low pressure protection

What it means

Balay explains that E16 appears when the appliance detects water coming in continuously. Water intake is governed by the inlet valve and the electronics that open and close it, and the amount is monitored by the appliance's control. If water keeps entering when it should not, the valve, its control or level detection can be at fault. The code does not say which, which is why Balay says to close the tap and call its service.

Warnings and stop conditions

  • Higheditorial warning

    With E16 water can keep entering after the programme ends: do not leave home with the dishwasher's tap open.

    Evidence: Balay España códigos de error del lavavajillas

Symptoms and causes

Probable causes · in order

  • Inlet valve that does not closePossible

    Water enters even when the appliance does not call for it. It is more likely if the filling sound stops when you close the tap.

    Evidence: Balay España códigos de error del lavavajillas

  • Intake control or level detectionPossible

    The electronics keep the valve open or do not detect the water already inside. Only measurements separate it.

    Evidence: Balay España códigos de error del lavavajillas

Virtual technician

Does E16 still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Sources and technical references

  1. 1

    Balay España códigos de error del lavavajillas

    Balay (BSH Electrodomésticos España) · official_doc

Sources: Balay España códigos de error del lavavajillasreviewed 2026-10-03 · verified

Was this entry useful?