Independent technical referenceOfficial site
  • Appliances
  • Washing machines

E17

Balay E17 on a washing machine: incorrect water supply

Verified with sources1 sourceReviewed Oct 3, 2026
Technician coming? See the 2 steps they must show you
Front-loading washing machine
Dany kgPublic domainImage source

Risk level

Medium

Proceed carefully and stop if the check is unclear.

Urgency

Medium

Quick answer

On a Balay washing machine, E17 means the water supply is not correct. Balay says to disconnect the washer, close the tap and check that tubes and hoses are clean, unblocked and never bent.

Safety first

Stop and check this first

  • Disconnect the washer and close the tap before loosening hoses or the filter, as Balay says: there is water next to an electrical appliance.

Safe checks you can perform

  • Disconnection and tap
  • Tubes and hoses
  • Inlet filter

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Filling test
  • Do not attempt this professional task: Solenoid valve, pressure switch and flow meter check

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Filling test

    What they doThe technician runs a programme and checks that the washer fills in normal time and without E17.

    They must show youa complete fill with no code.

    In writingprogramme, result and date.

  2. Solenoid valve, pressure switch and flow meter check

    What they doWith the washer disconnected, the technician checks the inlet solenoid valve, the pressure switch and the flow meter, the parts Balay names for the F17 supply fault.

    They must show youthe measurement of each part against the Balay value.

    In writingparts measured, result, any replaced part with reference and why.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. Disconnection and tap

    No special tools

    Who:
    you, no tools.
    How:
    disconnect the washer and close the tap, as Balay says; then check that the tap works and gives water.
    Result that matters:
    a working tap that gives water when opened.
    If the tap gives no water or very little:
    the problem is the installation.
    If the tap flows normally:
    check the hoses.
    Evidence to keep:
    note whether the tap gave water.

    Evidence: Balay España errores y códigos de error de lavadoras

  2. Tubes and hoses

    No special tools

    Who:
    you, with the tap closed and the washer unplugged.
    How:
    check that tubes and hoses are clean, unblocked and not bent anywhere along their route.
    Result that matters:
    a straight, clear hose.
    If it was kinked or blocked and it fills once corrected:
    that was the cause.
    If it is fine:
    move on to the inlet filter.
    Evidence to keep:
    a photo of the hose route.

    Evidence: Balay España errores y códigos de error de lavadoras

  3. Inlet filter

    No special tools

    Who:
    you, with the tap closed and the washer unplugged.
    How:
    clean the inlet filter following your model manual; drain the water inside first if the manual says so.
    Result that matters:
    a clean filter and normal filling on the next programme.
    If it was dirty and E17 no longer appears:
    it confirms the cause.
    If it was clean and E17 persists:
    call the Balay official service.
    Evidence to keep:
    a photo of the filter before and after.

    Evidence: Balay España errores y códigos de error de lavadoras

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Appliances
Brand
Balay
Product type
Washing machines

Known code variants

  • Balay E17 error washer
  • Balay E17 lavadora
  • Balay washer E17 not filling
  • Balay washing machine E17
  • Bosch dishwasher E17
  • Bosch E17
  • Bosch E17 error
  • Bosch E17 lavavajillas
  • Bosch Geschirrspüler Fehler E17
  • code erreur E17 lave-vaisselle Bosch
  • codice E17 Bosch
  • código E17 Bosch
  • E17
  • E17 Bosch dishwasher
  • E:17
  • erreur E17 Bosch
  • error E17 lavadora Balay
  • error E17 lavavajillas Bosch
  • errore E17 lavastoviglie Bosch
  • F17
  • F:17
  • Fehlercode E17 Bosch
  • lavadora Balay E17 no coge agua

What it means

Balay explains that E17 reports an incorrect water supply: the machine does not get the water it needs to fill. It can come from the tap, a kinked or dirty hose, or the inlet filter. For the sibling code F17, Balay says that if none of this solves it, the technician should check the solenoid valve, the pressure switch or the flow meter. The code does not point to a specific part.

Warnings and stop conditions

  • Mediumsource verified

    Disconnect the washer and close the tap before loosening hoses or the filter, as Balay says: there is water next to an electrical appliance.

    Evidence: Balay España errores y códigos de error de lavadoras

Symptoms and causes

Probable causes · in order

  • Tap closed or low flowCommon

    You can tell because the problem appears even with good hoses and filters; opening the tap fully or regaining pressure restores filling.

    Evidence: Balay España errores y códigos de error de lavadoras

  • Kinked or blocked hoseCommon

    Balay insists tubes and hoses must never stay bent; it shows when you check the route behind the washer.

    Evidence: Balay España errores y códigos de error de lavadoras

  • Dirty inlet filterPossible

    For F17 Balay asks you to clean the inlet filter; it stands out if water enters normally once cleaned.

    Evidence: Balay España errores y códigos de error de lavadoras

  • Internal filling partPossible

    If everything above is fine, Balay refers you to the technician to check the solenoid valve, pressure switch or flow meter.

    Evidence: Balay España errores y códigos de error de lavadoras

Virtual technician

Does E17 still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Sources and technical references

  1. 1

    Balay España errores y códigos de error de lavadoras

    Balay (BSH Electrodomésticos España) · official_doc

Sources: Balay España errores y códigos de error de lavadorasreviewed 2026-10-03 · verified

Was this entry useful?