Independent technical referenceOfficial site
  • Appliances
  • Dishwashers

E27

Balay E27 on a dishwasher: insufficient mains voltage

Verified with sources1 sourceReviewed Oct 3, 2026
Technician coming? See the 2 steps they must show you
Open dishwasher showing its racks
Yelderberry (talk)CC BY-SA 4.0Image source

Risk level

Medium

Proceed carefully and stop if the check is unclear.

Urgency

Medium

Quick answer

The dishwasher detects that the mains voltage is insufficient. Balay makes clear this is not an appliance fault and that you need an electrician to check the electrical supply.

Safety first

Stop and check this first

  • Do not open the consumer unit or the socket to check the voltage: it is work for an electrician, as Balay says for this code.

Safe checks you can perform

  • That the code is E27
  • When E27 appears
  • Electrical check by an electrician

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Measure voltage at the socket and circuit
  • Do not attempt this professional task: Appliance check if the supply is correct

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Measure voltage at the socket and circuit

    What they doThe electrician measures the voltage at the dishwasher's socket with a multimeter and checks the circuit that feeds it.

    They must show youthe voltage measured at the socket.

    In writingthe measured value and what was corrected in the installation.

  2. Appliance check if the supply is correct

    What they doIf the electrician confirms correct voltage and E27 remains, Balay's official service checks the dishwasher's power supply.

    They must show youthe electrician's report and a test run after the repair.

    In writingthe part replaced and the reason.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. That the code is E27

    No special tools

    Who:
    you.
    How:
    read the code on the display and compare it with Balay's code page.
    Result that matters:
    confirming that it is E27, insufficient mains voltage.
    If it is E27:
    it is not an appliance fault; continue with the checks.
    If it is another code:
    see its page; the advice changes.
    Evidence to keep:
    photo of the code with date and time.

    Evidence: Balay España códigos de error del lavavajillas

  2. When E27 appears

    No special tools

    Who:
    you.
    How:
    note the time and which other appliances were running when E27 appeared, without touching the consumer unit or the socket.
    Result that matters:
    a pattern that helps the electrician.
    If it matches other appliances running or certain times of day:
    tell the electrician; it guides the measurement.
    If it appears every time:
    that is useful too; the voltage drop may be constant.
    Evidence to keep:
    list with date, time and appliances running.

    Evidence: Balay España códigos de error del lavavajillas

  3. Electrical check by an electrician

    Tools required

    Who:
    an electrician.
    How:
    measures the voltage at the dishwasher's socket and checks the circuit and installation that feed it, as Balay asks for E27.
    Result that matters:
    whether the voltage reaching the appliance is sufficient.
    If low voltage is confirmed:
    the repair is in the installation, not the dishwasher.
    If the supply is fine and E27 remains:
    the supply no longer explains the code; call Balay's official service with the electrician's report.
    Evidence to keep:
    electrician's report with the measured voltage.

    Measuring mains voltage and opening the consumer unit or socket is work for an electrician only. Do not do it yourself.

    Evidence: Balay España códigos de error del lavavajillas

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Appliances
Brand
Balay
Product type
Dishwashers

Known code variants

  • Balay dishwasher E27
  • Balay E27
  • Bosch dishwasher E27
  • Bosch E27
  • Bosch E27 error
  • Bosch Geschirrspüler Fehler E27
  • code erreur E27 lave-vaisselle Siemens
  • codice E27 Bosch
  • codice E27 Siemens
  • código E27 Siemens
  • E27
  • E27 Bosch dishwasher
  • E27 lavavajillas Balay
  • E27 lavavajillas Bosch
  • E27 Siemens dishwasher
  • E:27
  • erreur E27 Siemens
  • Error E27 Balay
  • error E27 Bosch
  • error E27 lavavajillas Siemens
  • errore E27 lavastoviglie Bosch
  • errore E27 lavastoviglie Siemens
  • F27
  • F:27
  • Fehlercode E27 Bosch
  • Fehlercode E27 Siemens
  • lavavajillas Bosch E27
  • Siemens dishwasher E27
  • Siemens E27
  • Siemens Geschirrspüler Fehler E27

What it means

According to Balay, E27 means the mains voltage is insufficient. The dishwasher's control monitors the voltage it receives through the plug; the problem can be in the home's installation, in the circuit or in the socket that feeds the appliance. Balay says it is not a fault and refers you to an electrician. The code does not say where in the installation the voltage drops, only that it arrives too low.

Warnings and stop conditions

  • Mediumeditorial warning

    Do not open the consumer unit or the socket to check the voltage: it is work for an electrician, as Balay says for this code.

    Evidence: Balay España códigos de error del lavavajillas

Symptoms and causes

Probable causes · in order

  • Insufficient mains voltage in the homeCommon

    This is what Balay links to E27. It is not a dishwasher fault.

    Evidence: Balay España códigos de error del lavavajillas

  • Problem in the dishwasher's circuit or socketPossible

    Part of the electrical installation that the electrician must check. Only a measurement separates this from a general low voltage.

    Evidence: Balay España códigos de error del lavavajillas

Virtual technician

Does E27 still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Sources and technical references

  1. 1

    Balay España códigos de error del lavavajillas

    Balay (BSH Electrodomésticos España) · official_doc

Sources: Balay España códigos de error del lavavajillasreviewed 2026-10-03 · verified

Was this entry useful?