ErrorBase
Independent technical referenceOfficial site
  • Appliances
  • Washing machines

E80

Bosch E80 on washing machine: drive circuit fault

Verified with sources1 sourceReviewed Oct 3, 2026
Technician coming? See the 2 steps they must show you
Front-loading washing machine
Dany kgPublic domainImage source

Risk level

Medium

Proceed carefully and stop if the check is unclear.

Urgency

Medium

Quick answer

Your Bosch washer shows E80 because it detects a fault in the drive circuit. Bosch says only an authorized technician can clear it: unplug the washer, turn off the tap and call Bosch service with the exact code.

Safety first

Stop and check this first

  • Do not open the washer to check the motor or the electronics: Bosch reserves this fault for an authorized technician and there is mains voltage inside.

Safe checks you can perform

  • Note the code and model
  • Washer out of use until the visit
  • Call Bosch service

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Drive circuit diagnosis
  • Do not attempt this professional task: Function test under load

What a technician must be able to justify

A technician is coming

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Drive circuit diagnosis

    What they doAn authorized Bosch technician measures the drive circuit with instruments, with the washer unplugged before it is opened.

    They must show youthe measurement or reading that locates the failed part of the circuit.

    In writingthe diagnosis, the reference of the replaced part and why.

  2. Function test under load

    What they doAfter the repair, the technician completes a programme with spin to check E80 does not return.

    They must show youthe programme finished without E80.

    In writingthe test result.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Checks and evidence, step by step

Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. 1

    Note the code and model

    No special tools

    Procedure

    Who:
    you.
    How:
    write down the exact code on the display and the model from the rating plate, because Bosch asks for the exact message when you call.
    Result that matters:
    having the details service will ask for.
    If the display shows E80:
    there is no home step that clears it, according to Bosch.
    If it shows another code:
    look up its meaning before calling.
    Evidence to keep:
    a photo of the display and the rating plate.

    Evidence: Bosch Washer Error Codes

  2. 2

    Washer out of use until the visit

    No special tools

    Procedure

    Who:
    you.
    How:
    unplug the washer and turn off the inlet tap until the technician comes.
    Result that matters:
    not repeating cycles with a fault Bosch reserves for an authorized technician.
    If wet laundry is inside:
    wait for the door to unlock on its own; do not force it.
    If there is water in the drum:
    tell the technician when you call.
    Evidence to keep:
    a note of whether water or laundry was left inside.

    Evidence: Bosch Washer Error Codes

  3. 3

    Call Bosch service

    No special tools

    Procedure

    Who:
    you, only to make the call.
    How:
    contact Bosch service and give the E80 code and the model, as Bosch recommends.
    Result that matters:
    the technician arrives ready to check the drive circuit.
    If the washer is under warranty:
    mention it when booking.
    If it is not:
    ask for the quote to list diagnosis and parts separately.
    Evidence to keep:
    the service reference and the date of the call.

    Evidence: Bosch Washer Error Codes

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Appliances
Brand
Bosch
Product type
Washing machines

Known code variants

  • AEG asciugatrice E80
  • AEG dryer E80
  • AEG E80 error
  • AEG Fehler E80
  • AEG secadora E80
  • AEG sèche-linge E80
  • AEG Trockner E80
  • Bosch E80 lavadora
  • Bosch E80 washer
  • Bosch washer E80 error
  • code erreur AEG E80
  • E-80
  • E80 AEG asciugatrice
  • E80 AEG dryer
  • E80 AEG secadora
  • E80 AEG sèche-linge
  • E80 AEG Trockner
  • error AEG E80
  • error E80 lavadora Bosch
  • errore AEG E80

What it means

Bosch defines E80 as a fault or error in the washer drive circuit. Bosch documents it on its US washer page. Unlike other codes in its table, Bosch gives no home steps for E80: it says these faults can only be eliminated by an authorized technician and refers you to customer support. The code does not say which part of the circuit has failed; only the technician diagnosis, with the washer disconnected and with instruments, can confirm that.

Warnings and stop conditions

  • Mediumsource verified

    Do not open the washer to check the motor or the electronics: Bosch reserves this fault for an authorized technician and there is mains voltage inside.

    Evidence: Bosch Washer Error Codes

Symptoms and causes

Probable causes · in order

  • Drive circuit faultConfirmed

    It is the only cause Bosch gives for E80. It cannot be told apart by eye and needs an authorized technician to measure the circuit to find the part.

    Evidence: Bosch Washer Error Codes

Virtual technician

Does E80 still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Start diagnosis

Sources and technical references

  1. 1

    Bosch Washer Error Codes

    Bosch · 2026 · official_doc

Sources: Bosch Washer Error Codesreviewed 2026-10-03 · verified

Was this entry useful?