- Appliances
- Washing machines
F8E1
Brastemp F8E1 on washing machine: water supply error
Risk level
Low
Usually safe to check without specialist tools.
Urgency
Medium
Quick answer
Code F8E1 (also displayed as F08 E01 or Lo FL) on a Brastemp front-load washing machine signals a water supply error. Let the mandatory 8-minute drain finish while the door stays locked, open both water taps, straighten the inlet hoses, and press Ligar/Desligar to clear the code.
Safety first
Stop and check this first
- Do not try to force the door open while F8E1 or Lo FL is active: the door stays locked until the 8-minute drain cycle completes.
- To reduce the risk of hose failure, Brastemp's installation manual advises replacing inlet hoses every 5 years and checking periodically for bulges, cuts or leaks.
Safe checks you can perform
- Wait out the 8-minute drain and reset with Ligar/Desligar
- Check both water taps and straighten the inlet hoses
- Inspect the inlet valve screens for sediment
Leave these tasks to a qualified professional
- Do not attempt this professional task: Plumbing and gravity-tank height check by a plumber
- Do not attempt this professional task: Inlet system diagnosis by Rede de Serviços Brastemp
What a technician must be able to justify
Technician visit
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Plumbing and gravity-tank height check by a plumber
What they doIf a gravity tank feeds the laundry room with weak flow, a plumber verifies the tank elevation and tap clearance.
They must show yousteady flow from the laundry taps and leak-free hose couplings.
In writingthe measured tank height or water pressure and any plumbing adjustments made.
Inlet system diagnosis by Rede de Serviços Brastemp
What they doWhen F8E1 keeps returning with open taps, unkinked hoses and clean screens, the brand's authorized technician tests the inlet valves.
They must show youa normal hot and cold fill test completing without triggering the 8-minute drain.
In writingthe service order number, diagnosed fault and any replaced parts alongside your Nota Fiscal.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Wait out the 8-minute drain and reset with Ligar/Desligar
- Who:
- you, at the Brastemp washer control panel.
- How:
- leave the door closed while F8E1 or Lo FL flashes: the washer runs an 8-minute drain routine with the door locked and cannot be reset early. Once the drain stops, touch Ligar/Desligar once to clear the code, then touch Ligar/Desligar again to restart.
- Result that matters:
- the error clears from the digital display after the second touch.
- If the code clears after opening the taps:
- run a short cycle to confirm normal filling.
- If the display refuses to clear:
- wait until the full 8-minute pump-out routine finishes.
- Evidence to keep:
- a photo of the exact display sequence (F8E1, F08 E01 or Lo FL) and which cycle was running.
Evidence: Manual da Lavadora de Roupas e Instruções de Instalação Brastemp BNF15AS (W11503216A / W11503217A)
Check both water taps and straighten the inlet hoses
- Who:
- you, at the water supply taps behind the BNF15AS.
- How:
- verify that both inlet hoses are connected and that both hot and cold taps are fully open; if a single tap feeds the supplied Y-adapter, confirm there is more than 8 cm of clearance from the wall. Remove any kinks along the hoses.
- Result that matters:
- unrestricted water flow to the inlet connections with no leaks at the four sealing washers.
- If a tap was shut or a hose was kinked:
- fix it, clear the code with Ligar/Desligar and retest.
- If both taps are open and hoses sit straight:
- move on to checking the inlet screens.
- Evidence to keep:
- a photo of the rear hose connections and Y-adapter setup.
Evidence: Manual da Lavadora de Roupas e Instruções de Instalação Brastemp BNF15AS (W11503216A / W11503217A)
Inspect the inlet valve screens for sediment
- Who:
- you, with both taps shut and the BNF15AS unplugged.
- How:
- turn off both water taps, unplug the washer from its grounded 20 A outlet, and unscrew the hoses to check whether the inlet valve screens are clogged, making sure only manufacturer-recommended inlet hoses are fitted.
- Result that matters:
- clean inlet screens and properly seated sealing washers when reconnected and tested for leaks.
- If debris was blocking the screens:
- after cleaning and reattaching, test the Rápido cycle.
- If the screens are clean and F8E1 returns:
- book an inspection with the brand's authorized service.
- Evidence to keep:
- a photo of the inlet screens and the hose installation date (replace hoses every 5 years).
Evidence: Manual da Lavadora de Roupas e Instruções de Instalação Brastemp BNF15AS (W11503216A / W11503217A)
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Appliances
- Brand
- Brastemp
- Product type
- Washing machines
Known code variants
- Brastemp F8E1
- Brastemp washer F8E1
- F08 E01
- F08E01
- F8 E1
- F8E1
- lavadora Brastemp F8E1
- Lo FL
What it means
In the Brastemp BNF15AS washing machine manual and installation guide (documents W11503216A and W11503217A), F8 followed by E1, F08 followed by E01, or Lo followed by FL indicates that water is not entering the washer properly. When triggered, the unit drains for 8 minutes with the door locked and blocks any reset until that drain cycle ends. Other Brastemp models may differ, and this code alone never proves that an inlet valve or control board has failed.
Warnings and stop conditions
- Mediumeditorial warning
Do not try to force the door open while F8E1 or Lo FL is active: the door stays locked until the 8-minute drain cycle completes.
Evidence: Manual da Lavadora de Roupas e Instruções de Instalação Brastemp BNF15AS (W11503216A / W11503217A)
- Loweditorial warning
To reduce the risk of hose failure, Brastemp's installation manual advises replacing inlet hoses every 5 years and checking periodically for bulges, cuts or leaks.
Evidence: Manual da Lavadora de Roupas e Instruções de Instalação Brastemp BNF15AS (W11503216A / W11503217A)
Symptoms and causes
Probable causes · in order
- Hot or cold water supply taps closed or without flowCommon
Brastemp's troubleshooting table requires both hot and cold water taps to be open with water flowing through both connected inlet hoses.
Evidence: Manual da Lavadora de Roupas e Instruções de Instalação Brastemp BNF15AS (W11503216A / W11503217A)
- Kinked inlet hose or faulty auto-shutoff connectorCommon
A bend behind the cabinet or an improperly fitted auto-shutoff hose connector restricts water flow into the inlet valve during filling.
Evidence: Manual da Lavadora de Roupas e Instruções de Instalação Brastemp BNF15AS (W11503216A / W11503217A)
- Clogged inlet valve screen filters on the washerPossible
The BNF15AS manual notes that the mesh screens inside the washing machine's inlet valves can become clogged with debris from the water supply.
Evidence: Manual da Lavadora de Roupas e Instruções de Instalação Brastemp BNF15AS (W11503216A / W11503217A)
- Overhead water tank positioned less than 2 meters highLess common
Installation guide W11503217A states that homes supplying the washer from a gravity water tank must keep the tank more than 2 meters above the unit.
Evidence: Manual da Lavadora de Roupas e Instruções de Instalação Brastemp BNF15AS (W11503216A / W11503217A)
Virtual technician
Does F8E1 still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
Manual da Lavadora de Roupas e Instruções de Instalação Brastemp BNF15AS (W11503216A / W11503217A)
Brastemp · 2020 · official_doc
Was this entry useful?