Independent technical referenceOfficial site
  • Appliances
  • Coffee machines

Cleaning of the milk system

Cecotec Cleaning of the milk system on coffee maker: milk

Verified with sources1 sourceReviewed Oct 18, 2026
Technician coming? See the 2 steps they must show you
Black De'Longhi Magnifica bean-to-cup coffee machine with cups on top
FeťourPublic domainImage source

Risk level

Medium

Proceed carefully and stop if the check is unclear.

Urgency

Low

Quick answer

On the Cecotec Cumbia Power Matic-ccino 9000, Cleaning of the milk system appears on screen after using milk so you flush the cappuccinatore. Press OK, place the milk frother as shown in the on-screen drawing, and press OK again without touching the hot outlets.

Safety first

Stop and check this first

  • During the cleaning process, both the milk frother and the coffee outlet emit hot water and steam: do not touch or remove any part until the cleaning cycle is completed.
  • Unplug the power cable from the wall socket before cleaning the outer housing, never immerse the appliance in water, and do not use strong detergents, gasoline, powder abrasives, or metal brushes.

Safe checks you can perform

  • Press OK and start the automatic milk system cleaning cycle
  • Flush the milk tube and frother using clean water and the Milk icon
  • Remove the milk frother and brush the holes on the back

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Contact the official Technical Support Service of Cecotec
  • Do not attempt this professional task: Calibration or internal repair only by authorised Cecotec technicians

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Contact the official Technical Support Service of Cecotec

    What they doIf you detect any ongoing problem with the milk frother or steam circuit after completing the three cleaning procedures in the manual, contact the official Technical Support Service of Cecotec.

    They must show youthe cleaned milk frother, transparent tube, and rear holes, along with the message shown on screen.

    In writingyour Cecotec Technical Support Service case reference and whether the 2-year warranty covers the inspection.

  2. Calibration or internal repair only by authorised Cecotec technicians

    What they doIf the machine requires calibration, disassembly, or internal repair, have it carried out solely by personnel authorised by the official Technical Support Service of Cecotec.

    They must show youproof of authorisation from Cecotec and a completed milk system cleaning test cycle.

    In writingthe approved written quote, any parts serviced, and the official Cecotec service report.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. Press OK and start the automatic milk system cleaning cycle

    No special tools

    Who:
    you, right after dispensing milk.
    How:
    when "Cleaning of the milk system" is displayed on the screen, press OK, place the milk frother (cappuccinatore) as shown on the drawing, and press OK again to start the automatic milk system cleaning.
    Result that matters:
    hot water and steam discharging through the milk frother and coffee outlet until the cycle completes.
    If the cycle finishes and the screen returns to normal:
    the automatic cappuccinatore rinse is complete.
    If milk traces remain in the tube or frother:
    flush with a glass of clean water and brush the rear holes.
    Evidence to keep:
    photo of the screen prompt and confirmation that the automatic cleaning cycle finished.

    Evidence: Cumbia Power Matic-ccino 9000 Serie Nera y Bianca manual de instrucciones

  2. Flush the milk tube and frother using clean water and the Milk icon

    No special tools

    Who:
    you, with two glasses or containers and clean water.
    How:
    insert the transparent tube into the milk frother, place the other end in a glass of water and put a container below the milk dispenser, then press the Milk icon; once the cycle completes, empty the container and repeat until no milk residues are observed.
    Result that matters:
    clean water running through the transparent tube and milk dispenser with no milk residue.
    If no milk traces remain in the discharged water:
    the tube and dispenser path are clean.
    If flow is restricted or the machine notifies you to clean the frother body:
    remove the frother to brush its rear holes.
    Evidence to keep:
    photo of the clear water discharged at the end of the Milk icon cycle.

    Evidence: Cumbia Power Matic-ccino 9000 Serie Nera y Bianca manual de instrucciones

  3. Remove the milk frother and brush the holes on the back

    No special tools

    Who:
    you, with the cleaning brush and a glass of clean water.
    How:
    press both sides of the milk frother and pull it out from the coffee spout, place the milk frother in a glass of clean water, clean the holes on the back of the frother with the cleaning brush, and reinstall the milk frother in its position.
    Result that matters:
    the rear holes of the milk frother cleared of residue and the frother seated back on the coffee spout.
    If milk dispensing and frothing work normally again:
    the frother maintenance is complete.
    If an issue with the milk system or steam persists:
    contact Cecotec Technical Support Service.
    Evidence to keep:
    photo of the removed milk frother with its rear holes cleaned.

    Evidence: Cumbia Power Matic-ccino 9000 Serie Nera y Bianca manual de instrucciones

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Appliances
Brand
Cecotec
Product type
Coffee machines

Known code variants

  • cafetera Cecotec mensaje limpieza espumador de leche
  • Cecotec 01592 01593 limpieza leche
  • Cecotec 01592 milk cleaning
  • Cecotec cappuccinatore cleaning message
  • Cecotec cappuccinatore limpieza
  • Cecotec Cleaning of the milk system
  • Cecotec coffee maker milk system cleaning warning
  • Cecotec Limpieza del sistema de leche
  • Cecotec Power Matic-ccino 9000 Cleaning of the milk system
  • Cumbia Power Matic-ccino 9000 limpieza del sistema de leche
  • Cumbia Power Matic-ccino 9000 milk frother cleaning

What it means

According to the official Cecotec instruction manual for the Cumbia Power Matic-ccino 9000 Serie Nera and Serie Bianca coffee machines (references 01592 and 01593), "Cleaning of the milk system" ("Limpieza del sistema de leche" in Spanish) is displayed on the screen after milk has been used. It prompts you to run the automatic cleaning cycle for the milk frother (cappuccinatore) and maintain the transparent milk tube and rear frother holes. Other Cecotec models may use different menu messages, and seeing this prompt alone never proves that a component is faulty.

Warnings and stop conditions

  • Higheditorial warning

    During the cleaning process, both the milk frother and the coffee outlet emit hot water and steam: do not touch or remove any part until the cleaning cycle is completed.

    Evidence: Cumbia Power Matic-ccino 9000 Serie Nera y Bianca manual de instrucciones

  • Mediumeditorial warning

    Unplug the power cable from the wall socket before cleaning the outer housing, never immerse the appliance in water, and do not use strong detergents, gasoline, powder abrasives, or metal brushes.

    Evidence: Cumbia Power Matic-ccino 9000 Serie Nera y Bianca manual de instrucciones

Symptoms and causes

Probable causes · in order

  • Automatic cleaning prompt after dispensing milk or milk frothCommon

    After you prepare a milk-based coffee or dispense hot milk or froth, the coffee maker automatically displays this message so you flush the milk system.

    Evidence: Cumbia Power Matic-ccino 9000 Serie Nera y Bianca manual de instrucciones

  • Milk residue remaining inside the transparent tube and milk dispenserPossible

    Milk left inside the suction tube and frother after preparation needs to be flushed out with clean water using the Milk icon until no milk traces remain.

    Evidence: Cumbia Power Matic-ccino 9000 Serie Nera y Bianca manual de instrucciones

  • Residue built up in the holes at the back of the milk frotherPossible

    The holes on the back of the removable milk frother collect milk deposits over time and require removing the frother from the coffee spout to clean them with the cleaning brush in a glass of clean water.

    Evidence: Cumbia Power Matic-ccino 9000 Serie Nera y Bianca manual de instrucciones

Virtual technician

Does Cleaning of the milk system still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Sources and technical references

Sources: Cumbia Power Matic-ccino 9000 Serie Nera y Bianca manual de instruccionesreviewed 2026-10-18 · verified

Was this entry useful?