Independent technical referenceOfficial site
  • Appliances
  • Refrigerators

E10

Electrolux E10 on a fridge: compartment not cold enough

Verified with sources2 sourcesReviewed Oct 3, 2026
Technician coming? See the 2 steps they must show you
Stainless steel fridge freezer
Matti BlumeCC BY-SA 4.0Image source

Risk level

Medium

Proceed carefully and stop if the check is unclear.

Urgency

High

Quick answer

On an Electrolux fridge freezer, E10 means the fridge compartment is not cold enough. It often follows a long power cut or hot food left inside: set a colder temperature or Super Cool and keep the door closed.

Safety first

Stop and check this first

  • While E10 is showing, check the temperature with a thermometer: the Food Standards Agency says a fridge should be between 0 and 5°C. If in doubt about any food, follow official food safety guidance.

Safe checks you can perform

  • Temperature setting or Super Cool
  • Air duct holes and sensor
  • Actual temperature with a thermometer
  • Cooling system diagnosis

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Temperature and cooling system measurement
  • Do not attempt this professional task: Temperature recovery test

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Temperature and cooling system measurement

    What they doThe technician measures compartment temperatures and checks the fan, sensors and compressor operation.

    They must show youthe measured temperatures and which component is not responding.

    In writingthe diagnosis, any replaced part with its reference and the reason.

  2. Temperature recovery test

    What they doAfter the repair, the technician runs the fridge and checks it reaches the set temperature with no E10.

    They must show youthe temperature reached with no code.

    In writingfinal temperature, test time and date.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. Temperature setting or Super Cool

    No special tools

    Who:
    you, no tools.
    How:
    set a colder fridge temperature or switch on Super Cool, as Electrolux says, and keep the doors closed.
    Result that matters:
    E10 clearing once the temperature is reached.
    If it clears:
    it confirms a one off warm up (power cut or hot food).
    If it stays after several hours with the door shut:
    move on to the air ducts.
    Evidence to keep:
    a photo of the display and the time you adjusted it.

    Evidence: Fridge freezer shows code E10

  2. Air duct holes and sensor

    No special tools

    Who:
    you, no tools.
    How:
    move food away from the front of the air duct holes and keep food off the sensor.
    Result that matters:
    air moving freely in the compartment.
    If food was covering the holes:
    rearrange it and wait; if E10 clears, that was the cause.
    If it was clear:
    this factor is ruled out.
    Evidence to keep:
    photos of the inside before and after.

    Evidence: Fridge freezer shows code E10

  3. Actual temperature with a thermometer

    No special tools

    Who:
    you, with a fridge thermometer.
    How:
    measure the fridge temperature; the Food Standards Agency says it should be between 0 and 5°C and recommends using a thermometer.
    Result that matters:
    the measured value against that range.
    If it is between 0 and 5°C:
    cooling has recovered; watch that E10 does not return.
    If it stays above 5°C:
    book service and decide about food using official guidance.
    Evidence to keep:
    a photo of the thermometer with the time.

    Evidence: Fridge freezer shows code E10 · How to chill, freeze and defrost food safely

  4. Cooling system diagnosis

    Tools required

    Who:
    an authorised service technician.
    How:
    they check fan, sensors, defrost and compressor with their instruments.
    Result that matters:
    which part stops the fridge reaching temperature.
    If a component is not working:
    it confirms the repair.
    If everything works:
    they must explain why E10 appeared.
    Evidence to keep:
    a job sheet with the measurements.

    The refrigerant circuit is sealed and the appliance runs at mains voltage. Only a certified technician opens it.

    Evidence: Fridge freezer shows code E10

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Appliances
Brand
Electrolux
Product type
Refrigerators

Known code variants

  • -00
  • -10
  • -20
  • 10
  • AEG E10 error
  • AEG Fehler E10
  • AEG lavadora C1
  • AEG lavadora E10
  • AEG lavadora E11
  • AEG lavatrice C1
  • AEG lavatrice E10
  • AEG lavatrice E11
  • AEG lave-linge C1
  • AEG lave-linge E10
  • AEG lave-linge E11
  • AEG Waschmaschine C1
  • AEG Waschmaschine E10
  • AEG Waschmaschine E11
  • AEG washer C1
  • AEG washer E10
  • AEG washer E11
  • Balay E10 auto dosing
  • Balay E10 AutoDosificación
  • Balay lavadora E10
  • Balay washer E10
  • Balay washing machine error E10
  • Baxi 10
  • Baxi E 10
  • Bosch dishwasher E10
  • Bosch E10
  • Bosch E10 error
  • C1
  • code erreur AEG E10
  • code erreur E10 lave-vaisselle Siemens
  • codice E10 Siemens
  • código E10 lavavajillas Bosch
  • código E10 Siemens
  • E10
  • E10 AEG lavadora
  • E10 AEG lavatrice
  • E10 AEG lave-linge
  • E10 AEG Waschmaschine
  • E10 AEG washer
  • E10 Bosch dishwasher
  • E10 Siemens dishwasher
  • E11
  • E:10
  • Electrolux E10 error fridge freezer
  • Electrolux E10 frigorífico
  • Electrolux E10 lavadora
  • Electrolux E11 lavadora
  • Electrolux E11 washer
  • Electrolux fridge E10
  • Electrolux fridge E10 not cold
  • Electrolux washer 1 beep
  • Electrolux washer error E10
  • Electrolux washer not filling with water
  • Electrolux washing machine E10
  • erreur E10 Siemens
  • Error 10 Baxi
  • error AEG E10
  • error E10 frigorífico Electrolux
  • error E10 lavadora Balay
  • error E10 lavadora Electrolux
  • error E10 lavadora Teka
  • error E10 lavadora Zanussi
  • error E10 lavavajillas Bosch
  • error E10 lavavajillas Siemens
  • errore AEG E10
  • errore E10 lavastoviglie Siemens
  • Fehlercode E10 Siemens
  • frigorífico Electrolux E10 no enfría
  • lavadora Electrolux 1 pitido
  • lavadora Electrolux no coge agua
  • lavadora Teka no coge agua E10
  • lavadora Zanussi E10 no coge agua
  • lavavajillas Bosch E10
  • Platinum Compact 10
  • Siemens dishwasher E10
  • Siemens E10
  • Siemens Geschirrspüler Fehler E10
  • Teka lavadora E10
  • Teka TKD E10
  • Teka washer error E10
  • Teka washer not filling E10
  • Teka washing machine E10
  • Zanussi E10 error washer
  • Zanussi E10 lavadora
  • Zanussi washer E10 not filling
  • Zanussi washing machine E10

What it means

Electrolux defines E10 as the fridge compartment not cold enough. The control compares the temperature read by the compartment sensor with the set value. Electrolux says it is likely after a long power failure or when hot food has been left inside, and that it clears once the temperature is reached. The code describes a high temperature, not a fault: if it does not recover, a technician must look for the cause in the cooling system.

Warnings and stop conditions

  • Highsource verified

    While E10 is showing, check the temperature with a thermometer: the Food Standards Agency says a fridge should be between 0 and 5°C. If in doubt about any food, follow official food safety guidance.

    Evidence: How to chill, freeze and defrost food safely

Symptoms and causes

Probable causes · in order

  • Long power failureCommon

    Told apart because E10 appears when power returns after a long cut, as Electrolux says.

    Evidence: Fridge freezer shows code E10

  • Hot food insideCommon

    It appears shortly after hot food goes in; Electrolux names it as a usual cause.

    Evidence: Fridge freezer shows code E10

  • Cold air blocked near the sensorPossible

    Electrolux says to clear the area in front of the air duct holes and not to put food close to the sensor; you see it by checking how food is placed.

    Evidence: Fridge freezer shows code E10

  • Cooling system faultPossible

    If the code stays with the door shut, the right setting and clear ducts, Electrolux refers you to service.

    Evidence: Fridge freezer shows code E10

Virtual technician

Does E10 still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Sources and technical references

  1. 1

    Fridge freezer shows code E10

    Electrolux · official_doc

  2. 2

    How to chill, freeze and defrost food safely

    Food Standards Agency · 2017 · official_doc

Sources: Fridge freezer shows code E10 · How to chill, freeze and defrost food safelyreviewed 2026-10-03 · verified

Was this entry useful?