- Appliances
- Washing machines
E10
Fagor E10 on washing machine: low water pressure or no fill
Risk level
Low
Usually safe to check without specialist tools.
Urgency
Medium
Quick answer
E10 on Fagor washing machines (such as models 3FE-8314IT, 4FE-7612, and 4FE-7612X) indicates low water pressure or no water entering the machine. Fully open the water supply tap, check that the inlet hose is not bent, clean the mesh filter pin with a brush, and verify water pressure.
Safety first
Stop and check this first
- Risk of electric shock: before unscrewing the water supply hose or cleaning filters, always unplug the appliance from the wall outlet with dry hands by holding the plug itself, never the power cord.
- Never make technical modifications to the appliance or fit third-party spare parts: any repair work must be performed only by the official service facility or an electrician using original spare parts.
Safe checks you can perform
- Open the water supply valve fully and check water pressure and door
- Check the water intake hose for kinks and verify drain hose height
- Clean the water supply valve mesh filter using forceps and a brush
- Service centre inspection of the water supply valve and electrical supply
Leave these tasks to a qualified professional
- Do not attempt this professional task: Clean or replace the water supply solenoid valve with an original spare part
- Do not attempt this professional task: Verify water supply hose connection and set drain hose height (0.6-1 m)
What a technician must be able to justify
Technician visit
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Clean or replace the water supply solenoid valve with an original spare part
What they doWith the appliance unplugged and the tap closed, the service centre technician inspects the water supply valve and mesh filter assembly, clearing internal blockages or replacing the solenoid valve with an original Fagor spare part.
They must show youthe cleaned or replaced water supply valve and normal water intake at the start of a cycle.
In writingcode E10, the water supply valve cleaning or original part replacement reference, and leak test confirmation.
Verify water supply hose connection and set drain hose height (0.6-1 m)
What they doThe technician checks household water pressure, reconnects the water supply hose without kinks, and secures the drain hose outlet at a height of 0.6 to 1 m above the floor to prevent simultaneous filling and draining.
They must show youthe unkinked inlet hose connection, the drain hose set at 0.6 to 1 m, and steady drum filling.
In writingverified water pressure, drain hose height adjustment, and clearance of error code E10.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Open the water supply valve fully and check water pressure and door
- Who:
- you.
- How:
- turn the water supply tap feeding the Fagor washing machine fully open, check a nearby tap to confirm normal household water pressure, make sure the washer door is closed, and press Start/Pause.
- Result that matters:
- ruling out a shut tap, a mains water cut, or an unlatched door preventing water intake.
- If the tap was closed or water pressure just returned:
- restart the wash programme.
- If the tap is open with normal pressure and E10 returns:
- inspect the inlet and drain hoses behind the machine.
- Evidence to keep:
- whether the water tap was fully open and whether household water pressure was normal.
Evidence: Fagor 3FE-8314IT manual de instrucciones de lavadora IO-WMS-1543 (ES/PT/EN) · Fagor 4FE-7612 y 4FE-7612X manual de instrucciones de lavadora IO-WMS-2280
Check the water intake hose for kinks and verify drain hose height
- Who:
- you.
- How:
- inspect the cold water supply hose behind the washer to ensure it is not bent or blocked, and verify that the end of the drain hose is positioned above the drum water level at 0.6 to 1 m (60 to 100 cm) from the floor.
- Result that matters:
- eliminating a pinched supply hose or simultaneous water intake and draining caused by a low outlet hose.
- If the intake hose was kinked or the drain hose had dropped too low:
- reposition it properly and test a wash cycle.
- If both hoses are routed properly and the drum still does not fill:
- proceed to cleaning the water supply valve mesh filter.
- Evidence to keep:
- a photo of the rear water supply hose and the height of the drain hose support.
Evidence: Fagor 3FE-8314IT manual de instrucciones de lavadora IO-WMS-1543 (ES/PT/EN) · Fagor 4FE-7612 y 4FE-7612X manual de instrucciones de lavadora IO-WMS-2280
Clean the water supply valve mesh filter using forceps and a brush
- Who:
- you.
- How:
- close the water tap, unplug the washing machine from the wall outlet holding the plug with dry hands, unscrew the water supply hose, use forceps or pliers to grasp the filter mesh pin, remove and clean the filter preferably with a brush, and refit it.
- Result that matters:
- removing scale and grit from the supply hose and inlet valve mesh filter (which the manual advises cleaning at least once a month).
- If the mesh filter was dirty:
- brush it clean under water, reinstall the filter and hose tightly without leaks, and restart the machine.
- If the mesh filter is clean and restarting still shows E10:
- switch off, unplug the appliance, and contact the Fagor service centre.
- Evidence to keep:
- the condition of the mesh filter removed with forceps and leak-free hose reconnection.
Evidence: Fagor 3FE-8314IT manual de instrucciones de lavadora IO-WMS-1543 (ES/PT/EN) · Fagor 4FE-7612 y 4FE-7612X manual de instrucciones de lavadora IO-WMS-2280
Service centre inspection of the water supply valve and electrical supply
- Who:
- authorized Fagor service facility technician or qualified electrician.
- How:
- with the washing machine unplugged from the wall outlet and the water valve closed, test the water supply solenoid valve, internal wiring connections, and fill control output using original spare parts only.
- Result that matters:
- determining whether E10 is caused by a failed inlet solenoid valve or an internal electrical fault.
- If the water supply valve fails to open when energized:
- replace it with an original Fagor spare part and check for leaks.
- If the valve is intact but no control voltage reaches it:
- repair the internal wiring or control unit at the service facility.
- Evidence to keep:
- inlet valve electrical test result and original replacement part reference if fitted.
Touching live internal components poses a risk of fatal electric shock: all repairs must be performed only by the authorized service facility or an electrician.
Evidence: Fagor 3FE-8314IT manual de instrucciones de lavadora IO-WMS-1543 (ES/PT/EN) · Fagor 4FE-7612 y 4FE-7612X manual de instrucciones de lavadora IO-WMS-2280
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Appliances
- Brand
- Fagor
- Product type
- Washing machines
Known code variants
- 0x9002
- 3FE-8314IT E10
- 4FE-7612 E10
- Airfryer E10
- Bongo E10
- Bongo scooter error E10
- Bongo serie V comunicación pantalla
- Bongo V series display communication
- Bongo V55 E10
- Bongo V70 E10
- Cecotec scooter error E10
- Código de error E10
- E 10
- E-10
- E10
- E10 Airfryer
- E10 cold weather shutoff
- E10 error tado
- E10, 0x9002
- Error code E10
- Error E10
- error E10 lavadora Fagor
- error E10 tado
- Fagor E10
- Fagor washer E10
- Fagor washing machine E10
- lavadora Fagor E10
- Nest E10
- Nest E116
- Nest E160
- Nest E196
- Nest E296
- Nest E30
- Nest E66
- Nest E80
- Nest thermostat E10
- patinete Bongo error E10
- patinete Cecotec error E10
- sensor de temperatura tado E10
- tado E10
- tado Smart Thermostat E10
- tado thermostat E10
- tado wireless temperature sensor E10
- tado° E10
- termostato Nest E10
- termostato tado E10
What it means
In the instruction manuals for Fagor 3FE-8314IT (IO-WMS-1543) and 4FE-7612 / 4FE-7612X (IO-WMS-2280) washing machines, display error code E10 means low water pressure or no water in the washing machine, accompanied by an audible beep if active. The official troubleshooting tables link this condition to a closed water supply valve, a bent or blocked water intake hose, a clogged mesh filter in the supply valve, or simultaneous filling and draining caused by a low drain hose. Code E10 alone does not prove that the inlet valve is defective.
Warnings and stop conditions
- Highsource verified
Risk of electric shock: before unscrewing the water supply hose or cleaning filters, always unplug the appliance from the wall outlet with dry hands by holding the plug itself, never the power cord.
Evidence: Fagor 3FE-8314IT manual de instrucciones de lavadora IO-WMS-1543 (ES/PT/EN) · Fagor 4FE-7612 y 4FE-7612X manual de instrucciones de lavadora IO-WMS-2280
- Mediumsource verified
Never make technical modifications to the appliance or fit third-party spare parts: any repair work must be performed only by the official service facility or an electrician using original spare parts.
Evidence: Fagor 3FE-8314IT manual de instrucciones de lavadora IO-WMS-1543 (ES/PT/EN) · Fagor 4FE-7612 y 4FE-7612X manual de instrucciones de lavadora IO-WMS-2280
Symptoms and causes
Probable causes · in order
- Water supply tap turned off or low mains water pressureCommon
A closed or partially shut water tap or a drop in household water pressure prevents the washing machine drum from filling within the expected time.
Evidence: Fagor 3FE-8314IT manual de instrucciones de lavadora IO-WMS-1543 (ES/PT/EN) · Fagor 4FE-7612 y 4FE-7612X manual de instrucciones de lavadora IO-WMS-2280
- Bent water intake hose or clogged mesh filter on the supply valveCommon
A kinked cold water supply hose or sediment blocking the removable mesh filter inside the water supply valve restricts water inflow and triggers E10.
Evidence: Fagor 3FE-8314IT manual de instrucciones de lavadora IO-WMS-1543 (ES/PT/EN) · Fagor 4FE-7612 y 4FE-7612X manual de instrucciones de lavadora IO-WMS-2280
- Simultaneous water intake and draining from a low drain hosePossible
If the end of the drain hose lies below the water level in the appliance instead of 0.6 to 1 m above the floor, incoming water drains straight out during filling.
Evidence: Fagor 3FE-8314IT manual de instrucciones de lavadora IO-WMS-1543 (ES/PT/EN) · Fagor 4FE-7612 y 4FE-7612X manual de instrucciones de lavadora IO-WMS-2280
- Faulty water supply solenoid valve or internal control circuitLess common
If the water valve is open with normal pressure and the hose and mesh filter are clean yet E10 persists, the appliance requires inspection by the Fagor service centre.
Evidence: Fagor 3FE-8314IT manual de instrucciones de lavadora IO-WMS-1543 (ES/PT/EN) · Fagor 4FE-7612 y 4FE-7612X manual de instrucciones de lavadora IO-WMS-2280
Virtual technician
Does E10 still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
Fagor 3FE-8314IT manual de instrucciones de lavadora IO-WMS-1543 (ES/PT/EN)
Fagor · 2021 · manual
- 2
Fagor 4FE-7612 y 4FE-7612X manual de instrucciones de lavadora IO-WMS-2280
Fagor · 2021 · manual
Was this entry useful?