ErrorBase
Independent technical referenceOfficial site
  • Appliances
  • Dishwashers

E8

Fagor E8 on a dishwasher: distributary valve orientation failure

Verified with sources1 sourceReviewed Oct 4, 2026
Technician coming? See the 2 steps they must show you
Open dishwasher showing its racks
Yelderberry (talk)CC BY-SA 4.0Image source

Risk level

Low

Usually safe to check without specialist tools.

Urgency

Medium

Quick answer

On the Fagor 4LVF-639ADX dishwasher, E8 means a failure of orientation of the distributary valve. Fagor gives an open circuit or a break of the valve as the cause: unplug the appliance, turn off the water and call the service centre.

Safety first

Stop and check this first

  • For safety reasons Fagor says repairs should be referred to professionals: repairs carried out by unqualified persons may seriously endanger the user. Do not take the appliance apart to look for the valve.

Safe checks you can perform

  • Cut off power and water
  • Check nothing stops the spray arms
  • Prepare the call to the service centre

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Diagnosis of the distributary valve
  • Do not attempt this professional task: Full test programme

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Diagnosis of the distributary valve

    What they doThe authorised technician tests the circuit and the valve itself with the appliance isolated from the mains before replacing anything.

    They must show youthe measurement that tells an open circuit apart from a broken valve.

    In writingthe cause found, the part replaced with its reference and the reason.

  2. Full test programme

    What they doAfter the repair, the technician runs a complete programme and checks that the dishwasher finishes without E8 coming back.

    They must show youa complete programme without E8.

    In writingthe test carried out, the result, the date and the repair warranty.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. Cut off power and water

    No special tools

    Who:
    you, without opening the appliance.
    How:
    note the code and the programme, then unplug the dishwasher by the plug, not the cable, or switch off its fuse. Then turn off the water intake, as Fagor asks in case of problems or repairs.
    Result that matters:
    the appliance left without power and water until it has been inspected.
    If you could cut off both:
    leave it like that until the technician sees it.
    If you cannot reach the plug:
    switch off the fuse at the consumer unit or ask for help, without moving the appliance.
    Evidence to keep:
    a photo of the display showing E8, the programme selected and the time.

    Evidence: Fagor 4LVF-639ADX lavavajillas manual de instrucciones IO-DWS-5123 (ES/PT/EN)

  2. Check nothing stops the spray arms

    No special tools

    Who:
    you, with the appliance already unplugged.
    How:
    open the door and make sure no plate, long utensil or handle blocks the spray arms, and that they turn by hand. Fagor asks you to load dishes so the spray arms move freely. The manual does not link this to E8; it simply leaves the appliance in correct use for the technician.
    Result that matters:
    ruling out a badly placed load before the visit.
    If something was stopping an arm:
    rearrange the load and tell the technician.
    If the arms turn freely:
    go on to call the service centre.
    Evidence to keep:
    a photo of the load as it was.

    Evidence: Fagor 4LVF-639ADX lavavajillas manual de instrucciones IO-DWS-5123 (ES/PT/EN)

  3. Prepare the call to the service centre

    No special tools

    Who:
    you.
    How:
    find the serial number on the identification sticker, as Fagor asks before you get in touch, and the service centre address and phone number on the warranty card. Note when E8 appeared and whether it repeats.
    Result that matters:
    a complete report for the Fagor service centre.
    If it is under warranty:
    use the service named on the card, as Fagor says interfering with the appliance voids the warranty.
    If it is out of warranty:
    ask for a written quote before the valve is replaced.
    Evidence to keep:
    serial number, purchase date, photos and the service call number.

    Evidence: Fagor 4LVF-639ADX lavavajillas manual de instrucciones IO-DWS-5123 (ES/PT/EN)

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Appliances
Brand
Fagor
Product type
Dishwashers

Known code variants

  • 8 LED flashes
  • 8 parpadeos LED
  • CAME E8
  • Candy dishwasher 8 flashes
  • Candy dishwasher E08
  • Candy dishwasher E8
  • Candy dishwasher E8-Ei
  • Candy lavavajillas E08
  • Candy lavavajillas E8
  • E 08
  • E 8
  • E-08
  • E-8
  • E08
  • E8
  • E8-Ei
  • Ei
  • Error 8
  • Error de tapa de desbloqueo abierta
  • ERROR E8
  • error E8 lavavajillas Fagor
  • Fagor 4LVF-639ADX E8
  • Fagor dishwasher diverter valve fault E8
  • Fagor dishwasher E8
  • Fagor dishwasher error E8
  • Fagor distributary valve E8
  • Fagor lavavajillas E8
  • Fagor válvula direccional E8
  • Haier E8
  • lavavajillas Candy 8 parpadeos
  • lavavajillas Candy E8-Ei
  • lavavajillas Fagor fallo válvula de sentido E8
  • Open release-hatch error

What it means

The Fagor 4LVF-639ADX dishwasher manual (IO-DWS-5123, January 2026) defines E8 as a failure of orientation of the distributary valve; the Spanish section of the same manual calls it a directional valve adjustment failure. As possible causes it gives an open circuit or a break of the distributary valve, both inside the appliance. The manual offers no fix for the user. This table is for that model and other Fagor appliances may use different codes. The code alone never proves that a part is faulty.

Warnings and stop conditions

  • Mediumsource verified

    For safety reasons Fagor says repairs should be referred to professionals: repairs carried out by unqualified persons may seriously endanger the user. Do not take the appliance apart to look for the valve.

    Evidence: Fagor 4LVF-639ADX lavavajillas manual de instrucciones IO-DWS-5123 (ES/PT/EN)

Symptoms and causes

Probable causes · in order

  • Open circuit at the valvePossible

    The 4LVF-639ADX manual gives an open circuit as a possible cause of E8; finding it means testing with the appliance opened, which is a technician's job.

    Evidence: Fagor 4LVF-639ADX lavavajillas manual de instrucciones IO-DWS-5123 (ES/PT/EN)

  • Break of the distributary valvePossible

    The other cause Fagor gives for E8 is a break of the valve itself; the technician must confirm it before replacing it.

    Evidence: Fagor 4LVF-639ADX lavavajillas manual de instrucciones IO-DWS-5123 (ES/PT/EN)

Virtual technician

Does E8 still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Start diagnosis

Sources and technical references

  1. 1

    Fagor 4LVF-639ADX lavavajillas manual de instrucciones IO-DWS-5123 (ES/PT/EN)

    Fagor · 2026 · manual

Sources: Fagor 4LVF-639ADX lavavajillas manual de instrucciones IO-DWS-5123 (ES/PT/EN)reviewed 2026-10-04 · verified

Was this entry useful?