- Appliances
- Washing machines
F01
Hotpoint F01 on a washing machine: electronic circuit board fault
Risk level
Medium
Proceed carefully and stop if the check is unclear.
Urgency
Medium
Quick answer
On a Hotpoint washing machine, F01 means an electronic circuit board fault: the washer is not operating or functions cannot be selected. Hotpoint says to unplug it for at least 2 minutes, reconnect, wait 30 seconds and try again.
Safety first
Stop and check this first
- Do not open the washer to look at the board: it runs at mains voltage and Hotpoint asks for an engineer if F01 returns.
Safe checks you can perform
- Power reset
- Available functions
- Electronics diagnosis
Leave these tasks to a qualified professional
- Do not attempt this professional task: Board supply and connection measurement
- Do not attempt this professional task: Test after the repair
What a technician must be able to justify
Technician visit
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Board supply and connection measurement
What they doThe engineer measures the board supply with a multimeter and checks connectors and wiring before deciding to replace it.
They must show youthe measured values and the state of the connectors.
In writingwhat was measured, the result, the board reference if replaced and why.
Test after the repair
What they doThe engineer starts the washer, checks that every function can be selected and leaves a programme running.
They must show youprogramme selection and start without F01.
In writingthe test done, result and date.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Power reset
- Who:
- you, no tools.
- How:
- unplug the washer from the mains for at least 2 minutes, reconnect it, wait 30 seconds and try starting it, as Hotpoint says.
- Result that matters:
- the washer starts and lets you choose functions.
- If it starts without F01:
- it was a one off lock up.
- If F01 returns:
- the fault persists; book an engineer.
- Evidence to keep:
- note the date and whether the code returned.
Evidence: Washing Machine Error Codes Troubleshooting Guide - Hotpoint
Available functions
- Who:
- you.
- How:
- after the reset, try selecting several programmes and options.
- Result that matters:
- whether all functions respond or only some.
- If all respond and it washes normally:
- nothing more to do.
- If some do not respond or F01 appears:
- note which ones for the technician.
- Evidence to keep:
- a photo or video of the unresponsive panel.
Evidence: Washing Machine Error Codes Troubleshooting Guide - Hotpoint
Electronics diagnosis
- Who:
- Hotpoint service engineer.
- How:
- with the washer unpowered, checks the board, its supply and its connections with measuring equipment.
- Result that matters:
- whether the board gets correct supply and its connections are sound.
- If the supply or a connection fails:
- the board may not be the cause.
- If everything arrives correctly and the board does not respond:
- it confirms a board fault.
- Evidence to keep:
- a job sheet with what was measured.
The electronic board is at mains voltage: only the engineer checks it.
Evidence: Washing Machine Error Codes Troubleshooting Guide - Hotpoint
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Appliances
- Brand
- Hotpoint
- Product type
- Washing machines
Known code variants
- ecoTEC F.01
- Edesa EWF-9400 F01
- Edesa lavadora F01
- Edesa washer F01
- Edesa washing machine error F01
- error F01 Hisense
- error F01 lavadora Edesa
- error F01 lavadora Hotpoint
- error F01 lavavajillas Hotpoint
- error F01 lavavajillas Indesit
- error F01 secadora Whirlpool
- Error F01 Vaillant
- F.01
- F01 error Whirlpool dryer
- F1
- F:01
- Hisense F01 error
- Hisense lavadora F01
- Hisense washer F01
- Hisense washing machine F01 water inlet
- Hotpoint dishwasher F01
- Hotpoint dishwasher F01 anti-flood
- Hotpoint dishwasher F1
- Hotpoint F01 error dishwasher
- Hotpoint F01 error washer
- Hotpoint F01 lavadora
- Hotpoint F01 lavavajillas
- Hotpoint lavavajillas F1
- Hotpoint washer F01 not working
- Hotpoint washing machine F01
- Indesit dishwasher F01
- Indesit dishwasher F01 anti-flood
- Indesit dishwasher F1
- Indesit F01 error dishwasher
- Indesit F01 lavavajillas
- Indesit lavavajillas F1
- lavadora Hisense F01 no entra agua
- lavadora Hotpoint F01 no funciona
- lavavajillas Hotpoint F01 antidesbordamiento
- lavavajillas Indesit F01 antidesbordamiento
- secadora Whirlpool F01
- Vaillant F.01
- Whirlpool dryer F01
- Whirlpool F01
- Whirlpool F01 dryer
- Whirlpool F01 secadora
What it means
Hotpoint defines F01 as an electronic circuit board fault: the symptom is a washer that is not operating, or some or all functions that cannot be selected. The manufacturer's first step is a power reset, which rules out a one off control lock up. If the fault returns, Hotpoint asks for an engineer. The code does not prove the board must be replaced: the technician must confirm whether the source is the board, its supply or its connection to the rest.
Warnings and stop conditions
- Mediumeditorial warning
Do not open the washer to look at the board: it runs at mains voltage and Hotpoint asks for an engineer if F01 returns.
Evidence: Washing Machine Error Codes Troubleshooting Guide - Hotpoint
Symptoms and causes
Probable causes · in order
- One off control lock upPossible
You can tell because after unplugging for at least 2 minutes and reconnecting, the washer works and F01 does not return.
Evidence: Washing Machine Error Codes Troubleshooting Guide - Hotpoint
- Electronic circuit faultPossible
If F01 reappears after the reset, the fault persists in the electronics or their supply; the technician diagnoses it.
Evidence: Washing Machine Error Codes Troubleshooting Guide - Hotpoint
Virtual technician
Does F01 still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
Washing Machine Error Codes Troubleshooting Guide - Hotpoint
Hotpoint (Whirlpool UK) · official_doc
Was this entry useful?