- Appliances
- Washing machines
FE
LG washer FE code: overfill detected
Evidence linked to this decision
View source: LG USA front-load washer error code listRisk level
High
Professional inspection is recommended.
Urgency
Immediate
Quick answer
FE means a compatible LG washer detected a water level above the expected range. Stop the cycle and close the supply if water keeps entering.
Safety first
Stop and check this first
- If the level rises, water leaks or moisture is near electricity, close the water supply, isolate power without touching wet equipment and do not run another cycle.
Safe checks you can perform
- Stop the programme and watch the level
- Disconnect power when safe
- Record the exact model and symptoms
Leave these tasks to a qualified professional
- Do not attempt this professional task: Diagnose the inlet and level-control system
What a technician must be able to justify
A technician is coming
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Diagnose the inlet and level-control system
What they doA qualified technician should test the model-specific inlet valves, pressure path, level sensor and control response.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Stop the programme and watch the level
Switch the washer off. If water continues entering, close the accessible household supply valve immediately.
If the level rises, water leaks or moisture is near electricity, close the water supply, isolate power without touching wet equipment and do not run another cycle.
Evidence: LG USA front-load washer error code list
Disconnect power when safe
Unplug the washer only from a dry, safely accessible outlet; otherwise isolate it at the correct breaker.
If the level rises, water leaks or moisture is near electricity, close the water supply, isolate power without touching wet equipment and do not run another cycle.
Evidence: LG USA front-load washer error code list
Record the exact model and symptoms
Photograph the code and note whether water entered while the machine was off, without running another fill test.
If the level rises, water leaks or moisture is near electricity, close the water supply, isolate power without touching wet equipment and do not run another cycle.
Evidence: LG USA front-load washer error code list
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Virtual technician
Does FE still appear after these checks?
This guided flow uses the exact code and your answers to choose a test, an expected result and the next branch.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Appliances
- Brand
- LG
- Product type
- Washing machines
Known code variants
- code erreur FE lave-linge LG
- codice FE LG
- código FE LG
- erreur FE LG
- error FE lavadora LG
- error FE lavavajillas LG
- errore FE lavatrice LG
- FE error LG washer
- Fehlercode FE LG
- lavavajillas LG fuga FE
- LG dishwasher FE
- LG dishwasher leak FE
- LG FE
- LG FE dishwasher code
- LG FE lavavajillas
- LG Waschmaschine Fehler FE
- LG washer code FE
What it means
LG associates FE with an overfill condition. Excess inlet flow, an inlet valve that does not close or an incorrect level signal can produce the same display, so FE does not identify one replaceable part.
Warnings and stop conditions
- Highsource verified
If the level rises, water leaks or moisture is near electricity, close the water supply, isolate power without touching wet equipment and do not run another cycle.
Evidence: LG USA front-load washer error code list
Symptoms and causes
Probable causes · in order
- Water continues entering above the target levelConfirmed
The inlet path may keep supplying water after the control expects filling to stop.
Evidence: LG USA front-load washer error code list
- Water-level sensing is incorrectPossible
A pressure or level-sensing condition can report an abnormal level even when the visible amount is uncertain.
Evidence: LG USA front-load washer error code list
Sources and technical references
- 1
LG USA front-load washer error code list
LG Electronics · 2026 · official_doc
Was this entry useful?