- Appliances
- Dishwashers
LE
LG LE on a dishwasher: the wash motor is not working normally
Risk level
Medium
Proceed carefully and stop if the check is unclear.
Urgency
Medium
Quick answer
On an LG dishwasher, LE means the wash motor is not working normally. LG gives one home step: switch off, turn the dishwasher breaker off for 10 seconds and try another cycle. If it returns, the unit needs service.
Safety first
Stop and check this first
- Do not remove the kick plate or the base to look for the motor: mains voltage and water share that space. That check belongs to the service technician.
Safe checks you can perform
- Reset at the breaker
- Cycle stage where the code appears
- Model and serial number
Leave these tasks to a qualified professional
- Do not attempt this professional task: Test cycle after the repair
- Do not attempt this professional task: Motor and harness measurement
What a technician must be able to justify
A technician is coming
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Test cycle after the repair
What they doThe technician runs a full cycle and checks the motor works without LE returning.
They must show youa full cycle with no code.
In writingthe test, the result and the date.
Motor and harness measurement
What they doWith the unit disconnected, the technician checks the connectors and continuity of the harness between motor and board and measures the motor against LG specification.
They must show youthe measurements against specification and the condition of the connectors.
In writingwhat was measured, the result, the replaced part with its reference and the reason.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Reset at the breaker
- Who:
- you.
- How:
- switch the dishwasher off with POWER, turn off the breaker that feeds it, wait 10 seconds, turn it back on, switch on and start a new cycle.
- Result that matters:
- whether the full cycle finishes without LE.
- If it finishes with no code:
- it was a one-off glitch; watch whether it returns over the next loads.
- If LE shows again:
- LG says the unit needs service; do not keep resetting.
- Evidence to keep:
- note the time of the reset and the cycle stage where LE came back.
Evidence: LG Dish Washer - LE
Cycle stage where the code appears
- Who:
- you, by watching.
- How:
- note whether LE shows right at the start, during the wash or at the end, and whether you hear the motor run before the code.
- Result that matters:
- a concrete fact for the technician that helps separate motor, wiring and board.
- If it always shows at the same point:
- say so when you book the repair.
- If it shows intermittently:
- log each time so the technician sees the pattern.
- Evidence to keep:
- a note or short video of the panel with LE and the cycle stage.
Evidence: [LG Dishwasher] Guide to Error Codes
Model and serial number
- Who:
- you.
- How:
- find the model label (the manual says where it is) and photograph it next to the panel showing LE.
- Result that matters:
- the service knows which motor and board your unit has.
- If the unit is under warranty:
- say so when you request service.
- If you cannot find the label:
- the manual says where it is.
- Evidence to keep:
- dated photos of the label and the code.
Evidence: LG Dish Washer - LE
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Appliances
- Brand
- LG
- Product type
- Dishwashers
Known code variants
- code erreur LE lave-linge LG
- codice LE LG
- E6
- erreur LE LG
- error LE lavavajillas LG
- Error LE LG
- errore LE lavatrice LG
- Fehlercode LE LG
- lavavajillas LG motor LE
- LE code LG dishwasher
- LE1
- LG dishwasher LE
- LG LE
- LG LE dishwasher code
- LG LE lavavajillas
- LG Waschmaschine Fehler LE
What it means
LG describes LE on a dishwasher as a wash motor error: the control detects that the motor is not working normally. Its support guide adds that it may come from the motor itself or from the wiring harness between the motor and the control board. The only step LG leaves to the owner is a reset by cutting power for 10 seconds; if LE shows again, it asks for service. The code does not say whether the motor, the wiring or the board failed: the technician determines that by measuring.
Warnings and stop conditions
- Mediumeditorial warning
Do not remove the kick plate or the base to look for the motor: mains voltage and water share that space. That check belongs to the service technician.
Evidence: LG Dish Washer - LE
Symptoms and causes
Probable causes · in order
- One-off control glitchPossible
You can tell because LE clears after the breaker is off for 10 seconds and the next cycle finishes with no code.
Evidence: LG Dish Washer - LE
- Harness between motor and boardPossible
LG lists it as a possible origin. It is not visible from outside: only a technician separates it from the motor by checking connectors and continuity.
Evidence: LG Dish Washer - LE
- Wash motorPossible
It is the system the code watches. Only the technician's measurements against specification confirm it; the code alone is not enough to replace it.
Evidence: [LG Dishwasher] Guide to Error Codes · LG Dish Washer - LE
Virtual technician
Does LE still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
[LG Dishwasher] Guide to Error Codes
LG Electronics · 2025 · official_doc
- 2
LG Electronics · 2024 · official_doc
Was this entry useful?