Independent technical referenceOfficial site
  • Appliances
  • Dishwashers

tE

LG tE on a dishwasher: temperature sensor problem

Verified with sources1 sourceReviewed Oct 3, 2026
Technician coming? See the 2 steps they must show you
Open dishwasher showing its racks
Yelderberry (talk)CC BY-SA 4.0Image source

Risk level

Medium

Proceed carefully and stop if the check is unclear.

Urgency

Medium

Quick answer

On an LG dishwasher, tE points to a temperature sensor problem, such as a poor contact or a sensor failure. LG gives no home steps for tE: it asks for a service inspection. Note the code and the model.

Safety first

Stop and check this first

  • The temperature sensor sits in the base next to the heating circuit and mains voltage: checking it is for the service technician, not the owner.

Safe checks you can perform

  • Code, model and date
  • When tE appears
  • Using the unit until the inspection

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Sensor and connection measurement
  • Do not attempt this professional task: Test cycle with heating

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Sensor and connection measurement

    What they doWith the unit disconnected, the technician checks the temperature sensor connector and wiring and measures its resistance against LG specification.

    They must show youthe measured value against specification and the connector condition.

    In writingwhat was measured, the result and, if the sensor is replaced, its reference and the reason.

  2. Test cycle with heating

    What they doAfter the repair, the technician runs a programme that heats the water and checks it finishes without tE.

    They must show youa heated cycle completed with no code.

    In writingthe test, the result and the date.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. Code, model and date

    No special tools

    Who:
    you.
    How:
    photograph the panel showing tE and the model and serial label; the manual says where it is.
    Result that matters:
    the service knows which sensor your unit has before the visit.
    If the unit is under warranty:
    say so when you request service.
    If you cannot find the label:
    the manual says where it is.
    Evidence to keep:
    the dated photos.

    Evidence: [LG Dishwasher] Guide to Error Codes

  2. When tE appears

    No special tools

    Who:
    you, by watching.
    How:
    note whether tE shows right at the start or when the cycle should heat the water, and whether it happens on every programme.
    Result that matters:
    a useful fact to separate an intermittent contact from a sensor that does not read.
    If it always shows at the start:
    tell the technician.
    If it comes and goes or only on some programmes:
    write down which; it points to an intermittent contact the technician should check.
    Evidence to keep:
    a note with programme, stage and date of each occurrence.

    Evidence: [LG Dishwasher] Guide to Error Codes

  3. Using the unit until the inspection

    No special tools

    Who:
    you.
    How:
    do not take the unit apart to look for the sensor; stop repeating cycles with tE and wait for the inspection LG asks for.
    Result that matters:
    not complicating the diagnosis or handling mains powered parts.
    If the code clears by itself:
    still tell the technician, an intermittent contact can return.
    If it persists:
    keep the service appointment.
    Evidence to keep:
    note whether it cleared and when.

    Evidence: [LG Dishwasher] Guide to Error Codes

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Appliances
Brand
LG
Product type
Dishwashers

Known code variants

  • code erreur tE lave-linge LG
  • codice tE LG
  • código tE LG
  • erreur tE LG
  • error tC secadora Samsung
  • error tE lavadora LG
  • error tE lavavajillas LG
  • error tE lavavajillas Samsung
  • errore tE lavatrice LG
  • Fehlercode tE LG
  • lavadora Samsung error tC
  • LG dishwasher tE
  • LG dishwasher temperature sensor tE
  • LG tE
  • LG tE dishwasher code
  • LG tE lavavajillas
  • LG Waschmaschine Fehler tE
  • LG washer code tE
  • Samsung dishwasher tE
  • Samsung dishwasher temperature sensor tE
  • Samsung dryer tC error
  • Samsung lavadora tE
  • Samsung tE dishwasher code
  • Samsung tE dryer
  • Samsung tE lavavajillas
  • Samsung tE secadora
  • Samsung tE sensor temperatura
  • Samsung tE temperature sensor
  • Samsung washer tE
  • Samsung washing machine tC
  • sensor temperatura lavavajillas LG
  • sensor temperatura lavavajillas Samsung
  • tC
  • tC1
  • tC2
  • tC3
  • tC5
  • tE error LG washer
  • tE1
  • tE2
  • tE3
  • tE4
  • tE5

What it means

According to the LG guide, tE covers temperature sensor problems on the dishwasher: a poor contact at its connection or a failure of the sensor itself. The control uses that reading to manage water heating, so with tE it cannot watch the wash temperature properly. LG says tE requires a service inspection. The code does not separate connector, wiring and sensor: only measuring the sensor resistance and checking its connections does that.

Warnings and stop conditions

  • Mediumeditorial warning

    The temperature sensor sits in the base next to the heating circuit and mains voltage: checking it is for the service technician, not the owner.

    Evidence: [LG Dishwasher] Guide to Error Codes

Symptoms and causes

Probable causes · in order

  • Poor contact at the sensor connectionPossible

    LG names it explicitly. It stands apart from a failed sensor when the technician checks the connector and the reading is correct again after remaking the contact.

    Evidence: [LG Dishwasher] Guide to Error Codes

  • Failed temperature sensorPossible

    The other cause LG lists. Only measuring the sensor against the maker's specification confirms it; the code alone is not enough to replace it.

    Evidence: [LG Dishwasher] Guide to Error Codes

Virtual technician

Does tE still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Sources and technical references

  1. 1

    [LG Dishwasher] Guide to Error Codes

    LG Electronics · 2025 · official_doc

Sources: [LG Dishwasher] Guide to Error Codesreviewed 2026-10-03 · verified

Was this entry useful?