Independent technical referenceOfficial site
  • Appliances
  • Coffee machines

VERDE-2-PARPADEOS-FIJO

Nespresso Vertuo Plus green light blinks twice: water or capsule

Verified with sources1 sourceReviewed Oct 4, 2026
Technician coming? See the 2 steps they must show you
Black De'Longhi Magnifica bean-to-cup coffee machine with cups on top
FeťourPublic domainImage source

Risk level

Low

Usually safe to check without specialist tools.

Urgency

Medium

Quick answer

On the Nespresso Vertuo Plus, if the green light blinks twice and then goes back to steady, the water tank is empty or the capsule is missing. Fill the tank, insert a fresh capsule, lock the handle and press the button.

Safety first

Stop and check this first

  • Do not open the head or put your fingers in during brewing: the water and capsule are hot.
  • Descale only with the procedure and product Nespresso specifies; a light pattern alone does not prove a part is faulty.

Safe checks you can perform

  • Tank full and seated
  • Fresh capsule and handle locked
  • Eject capsule, clean and descale

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Check by Nespresso service
  • Do not attempt this professional task: Test with and without capsule

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Check by Nespresso service

    What they doIf the pattern continues with a full tank, a correct capsule, the handle locked and the machine descaled, Nespresso service checks the machine.

    They must show youthe machine brewing coffee after the check.

    In writingthe cause found and any part replaced, with its reference.

  2. Test with and without capsule

    What they doThe technician brews a coffee with a capsule and runs a cleaning without one to check the machine detects both cases.

    They must show youthe coffee and the cleaning completed.

    In writingthe test carried out and the date.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. Tank full and seated

    No special tools

    Who:
    you, no tools.
    How:
    remove the tank, rinse it and fill it with fresh drinking water; put it back properly in place.
    Result that matters:
    water available to brew.
    If pressing the button starts brewing:
    water was missing.
    If it blinks twice again:
    check the capsule.
    Evidence to keep:
    a note of whether the tank was empty.

    Evidence: User manual of Vertuo Plus and Vertuo Next Nespresso coffee machines

  2. Fresh capsule and handle locked

    No special tools

    Who:
    you.
    How:
    unlock the handle, open the head and check that a fresh, undamaged capsule sits in the correct position; close, lock the handle and press the button to start.
    Result that matters:
    brewing starting with the green light rotating.
    If the coffee starts:
    the capsule was missing or misplaced.
    If still no coffee or water:
    go to the next check.
    Evidence to keep:
    a photo of the fitted capsule.

    Evidence: User manual of Vertuo Plus and Vertuo Next Nespresso coffee machines

  3. Eject capsule, clean and descale

    No special tools

    Who:
    you, with Nespresso descaling agent if needed.
    How:
    open the head to let the capsule eject and run a cleaning as described in the cleaning section of the manual; if you have not descaled for a while, descale following the manual.
    Result that matters:
    water and coffee flowing normally.
    If it works again:
    it was dirt or scale.
    If it still does not work:
    contact Nespresso.
    Evidence to keep:
    the date of the last descaling.

    Evidence: User manual of Vertuo Plus and Vertuo Next Nespresso coffee machines

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Appliances
Brand
Nespresso
Product type
Coffee machines

Known code variants

  • Nespresso Vertuo green blinking twice
  • Nespresso Vertuo luz verde parpadea 2 veces
  • Nespresso Vertuo Plus green light blinks twice
  • Nespresso Vertuo Plus luz verde parpadea dos veces
  • Vertuo Plus blink two times then steady green
  • Vertuo Plus no sale café luz verde
  • Vertuo Plus verde dos parpadeos y fijo
  • Vertuo Plus water tank empty or capsule missing

What it means

Nespresso's manual for the Vertuo Plus and Vertuo Next describes the Vertuo Plus pattern blink two times and then back to steady green with two reasons: the water tank is empty or the capsule is missing. The machine is ready (steady green) but will not start brewing. If no coffee or water comes out, Nespresso asks you to check the tank, that a fresh capsule is in the correct position and the handle locked, and to descale if necessary. The pattern is not a fault.

Warnings and stop conditions

  • Mediumeditorial warning

    Do not open the head or put your fingers in during brewing: the water and capsule are hot.

    Evidence: User manual of Vertuo Plus and Vertuo Next Nespresso coffee machines

  • Loweditorial warning

    Descale only with the procedure and product Nespresso specifies; a light pattern alone does not prove a part is faulty.

    Evidence: User manual of Vertuo Plus and Vertuo Next Nespresso coffee machines

Symptoms and causes

Probable causes · in order

  • Water tank emptyCommon

    There is not enough water in the tank; Nespresso says to fill it and press the button again to brew.

    Evidence: User manual of Vertuo Plus and Vertuo Next Nespresso coffee machines

  • Capsule missing or misplacedCommon

    There is no capsule in the head, or it is not in the correct position with the handle locked; the machine will not start the coffee.

    Evidence: User manual of Vertuo Plus and Vertuo Next Nespresso coffee machines

  • Tank misplaced or scale build-upPossible

    If nothing comes out with water and a capsule, Nespresso asks you to check the tank position and descale if necessary.

    Evidence: User manual of Vertuo Plus and Vertuo Next Nespresso coffee machines

Virtual technician

Does VERDE-2-PARPADEOS-FIJO still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Sources and technical references

Sources: User manual of Vertuo Plus and Vertuo Next Nespresso coffee machinesreviewed 2026-10-04 · verified

Was this entry useful?