Independent technical referenceOfficial site
  • Appliances
  • Coffee machines

E01

Philips E01 on coffee machine: coffee funnel blocked

Verified with sources1 sourceReviewed Oct 3, 2026
Technician coming? See the 2 steps they must show you
Black De'Longhi Magnifica bean-to-cup coffee machine with cups on top
FeťourPublic domainImage source

Risk level

Low

Usually safe to check without specialist tools.

Urgency

Medium

Quick answer

Your Philips coffee machine shows E01 because the grinder is not working as it should: ground coffee is blocking the funnel that feeds the brew group. Switch it off, wait until it is silent, remove the brew group and clear the funnel with a spoon handle.

Safety first

Stop and check this first

  • Do not put fingers or metal objects into the grinder to free the coffee: use only the spoon handle through the funnel, as Philips instructs. The inside of the grinder is not a user area.

Safe checks you can perform

  • Switch off and wait for silence
  • Clear the funnel with a spoon handle
  • Vacuum, refit and brew an espresso

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Grinder and coffee transport diagnosis
  • Do not attempt this professional task: Post repair test

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Grinder and coffee transport diagnosis

    What they doPhilips service checks the grinder, the funnel and the path to the brew group when E01 persists with a clear funnel.

    They must show youthe clear funnel and the fault reproduced with coffee beans.

    In writingthe check performed, any replaced part and the reason.

  2. Post repair test

    What they doThe technician brews several coffees in a row to confirm the grounds reach the brew group without the error.

    They must show youseveral coffees brewed without E01.

    In writingthe test result and the part reference.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. Switch off and wait for silence

    No special tools

    Who:
    you.
    How:
    switch the machine off and wait until you hear no noise from it; Philips says this takes about 15 to 20 seconds.
    Result that matters:
    the machine fully stopped before you touch the brew group.
    If it still makes noise:
    wait longer; do not open the service door while it runs.
    If it is silent:
    go on to remove the brew group.
    Evidence to keep:
    a note of when E01 appeared and which drink you were making.

    Evidence: I see an error code on my Philips Espresso Machine

  2. Clear the funnel with a spoon handle

    No special tools

    Who:
    you, no tools.
    How:
    open the service door, remove the brew group, insert the spoon handle into the pre-ground coffee funnel (or from below if there is none) and move it up and down until the clogged coffee falls. It may take some force.
    Result that matters:
    whether packed coffee falls and the funnel is clear.
    If a lump of coffee falls:
    the blockage was the likely cause; go on cleaning.
    If nothing falls and the funnel was already clear:
    a blockage does not explain E01; prepare the record for service.
    Evidence to keep:
    a photo of the funnel before and after.

    Evidence: I see an error code on my Philips Espresso Machine

  3. Vacuum, refit and brew an espresso

    No special tools

    Who:
    you.
    How:
    vacuum the fallen coffee and the funnel (cover the other end with your hand), refit the brew group, switch on and make an espresso. Then check the funnel is still clear.
    Result that matters:
    whether the espresso comes out without E01 and the funnel stays clean.
    If it brews without the error:
    a grinder fault is ruled out for now.
    If E01 returns after repeating the procedure:
    contact Philips.
    Evidence to keep:
    date, number of attempts and a photo of the display with the code.

    Evidence: I see an error code on my Philips Espresso Machine

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Appliances
Brand
Philips
Product type
Coffee machines

Known code variants

  • Bosch dishwasher E01
  • Bosch dryer E01
  • Bosch dryer E01 fluff filter
  • Bosch E01
  • Bosch E01 error
  • Bosch E01 error tumble dryer
  • Bosch E01 secadora
  • código E01 lavavajillas Bosch
  • E 01
  • E01 Bosch dishwasher
  • E1
  • E:01
  • Error 01
  • error E01 lavavajillas Bosch
  • error E01 secadora Bosch
  • lavavajillas Bosch E01
  • Philips cafetera E01
  • Philips E01
  • Philips error 01
  • Philips espresso E01
  • secadora Bosch E01 filtro de pelusas

What it means

Philips says error 01 means the grinder in the espresso machine is not working as it should because of a coffee funnel blockage: the ground coffee cannot be transported to the brew group and packs into the duct. The control raises it when grinding cannot proceed. The code does not prove the grinder is broken: in most cases clearing the funnel and cleaning the brew group area, as Philips describes, is enough.

Warnings and stop conditions

  • Loweditorial warning

    Do not put fingers or metal objects into the grinder to free the coffee: use only the spoon handle through the funnel, as Philips instructs. The inside of the grinder is not a user area.

    Evidence: I see an error code on my Philips Espresso Machine

Symptoms and causes

Probable causes · in order

  • Packed ground coffee in the funnelCommon

    The funnel down to the brew group is full of compacted grounds; pushing the spoon handle through it releases a lump of coffee and the error clears.

    Evidence: I see an error code on my Philips Espresso Machine

  • Coffee residue around the brew groupPossible

    After clearing, grounds build up again around the brew group; vacuuming the brew group cavity and the funnel, as Philips asks, stops the blockage returning after a few cups.

    Evidence: I see an error code on my Philips Espresso Machine

  • Grinder fault needing repairPossible

    The funnel stays clear after repeating the procedure and E01 still returns; it is no longer a blockage and Philips refers you to its service.

    Evidence: I see an error code on my Philips Espresso Machine

Virtual technician

Does E01 still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Sources and technical references

Sources: I see an error code on my Philips Espresso Machinereviewed 2026-10-03 · verified

Was this entry useful?