- Appliances
- Dishwashers
1E
Samsung 1E on a dishwasher: clogged filter or high temperature heater
Risk level
Medium
Proceed carefully and stop if the check is unclear.
Urgency
Medium
Quick answer
On a Samsung dishwasher, 1E means different things by model: on WaterWall models, a clogged filter; on rotary spray arm models, a high temperature heater error. On a WaterWall, clean the fine filter at the bottom of the tub.
Safety first
Stop and check this first
- On a rotary spray arm model, 1E means high temperature: if you notice a burning smell or warped plastic, cut power and do not use it until inspected.
Safe checks you can perform
- Type of dishwasher
- Fine filter at the bottom (WaterWall)
- Restart and normal cycle (rotary)
Leave these tasks to a qualified professional
- Do not attempt this professional task: Diagnosis by wash system
- Do not attempt this professional task: Test cycle after the repair
What a technician must be able to justify
A technician is coming
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Diagnosis by wash system
What they doOn a WaterWall, the technician checks the filter, sump and water path; on a rotary model, they measure the heater, its control and the temperature sensor against Samsung specification.
They must show youwhat was found and the measurements against specification.
In writingthe type of unit, what was checked, the result and the reference of any replaced part.
Test cycle after the repair
What they doThe technician runs a normal cycle and checks 1E does not return.
They must show youa full cycle with no code.
In writingthe test, the result and the date.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Type of dishwasher
- Who:
- you.
- How:
- check your manual or model page to see whether it is a WaterWall or a rotary spray arm dishwasher.
- Result that matters:
- knowing which of the two 1E meanings applies to your unit.
- If it is a WaterWall:
- 1E points to the filter; go on to clean it.
- If it has rotary arms:
- 1E is a high temperature heater error; go on to the restart and normal cycle.
- Evidence to keep:
- note the model and type.
Evidence: Samsung USA dishwasher error codes · Common Samsung dishwasher error codes and their meaning
Fine filter at the bottom (WaterWall)
- Who:
- you, following the manual.
- How:
- switch the unit off, take out the fine filter at the bottom of the tub and clean it as your model's manual describes.
- Result that matters:
- a clean filter that lets water through.
- If it had debris and the next cycle ends without 1E:
- that was the cause.
- If it was clean and 1E persists:
- contact Samsung service.
- Evidence to keep:
- a photo of the filter before and after.
Evidence: Samsung USA dishwasher error codes · Common Samsung dishwasher error codes and their meaning
Restart and normal cycle (rotary)
- Who:
- you.
- How:
- switch the dishwasher off and on again and run a normal cycle with detergent, as Samsung says for rotary models.
- Result that matters:
- whether the cycle finishes without 1E.
- If it finishes with no code:
- it was a one-off glitch; watch the next loads.
- If 1E returns:
- contact the service centre; if you notice a burning smell, stop using it.
- Evidence to keep:
- note the date, the programme and when 1E appeared.
Evidence: Samsung USA dishwasher error codes · Common Samsung dishwasher error codes and their meaning
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Appliances
- Brand
- Samsung
- Product type
- Dishwashers
Known code variants
- error 1E lavavajillas Samsung
- filtro atascado lavavajillas Samsung 1E
- Samsung 1E dishwasher code
- Samsung 1E lavavajillas
- Samsung dishwasher 1E
- Samsung dishwasher clogged filter 1E
What it means
Samsung gives 1E (or IE) two meanings depending on the wash system. On WaterWall models it is a clogged filter error: water is not passing through the filter. On rotary spray arm models it is a high temperature heater error, like HC: overheating inside the unit. For WaterWall, Samsung asks you to clean the fine filter at the bottom; for rotary models, to power cycle and run a normal cycle with detergent. If it persists, in both cases, service. The code does not name a failed part.
Warnings and stop conditions
- Mediumeditorial warning
On a rotary spray arm model, 1E means high temperature: if you notice a burning smell or warped plastic, cut power and do not use it until inspected.
Evidence: Common Samsung dishwasher error codes and their meaning
Symptoms and causes
Probable causes · in order
- Clogged fine filter (WaterWall models)Common
Samsung gives it for WaterWall models: water does not pass through the filter. Told apart when you take the filter out: if it has debris and 1E does not return after cleaning, that was it.
Evidence: Samsung USA dishwasher error codes · Common Samsung dishwasher error codes and their meaning
- Overheating (rotary models)Possible
On rotary spray arm models, Samsung treats 1E as a high temperature heater error. What causes it the technician separates by measuring.
Evidence: Samsung USA dishwasher error codes · Common Samsung dishwasher error codes and their meaning
Virtual technician
Does 1E still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
Samsung USA dishwasher error codes
Samsung · 2026 · official_doc
- 2
Common Samsung dishwasher error codes and their meaning
Samsung · 2026 · official_doc
Was this entry useful?