- Appliances
- Dishwashers
E24
Siemens dishwasher E24: water is not draining
Evidence linked to this decision
View source: Siemens dishwasher error codesRisk level
Medium
Proceed carefully and stop if the check is unclear.
Urgency
High
Quick answer
E24 or F24 means the dishwasher is not draining correctly. Check only the documented model-accessible filters pump cover visible drain hose and siphon path.
Safety first
Stop and check this first
- If E24 remains close the water tap switch the appliance off and contact Siemens Service. Stop immediately if water leaks outside the dishwasher or electrical parts are wet.
Safe checks you can perform
- Switch off before handling standing water
- Clean the model-accessible filter and pump cover
- Inspect the visible drain route
Leave these tasks to a qualified professional
- Do not attempt this professional task: Diagnose persistent E24 drainage failure
What a technician must be able to justify
Technician visit
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Diagnose persistent E24 drainage failure
What they doSiemens Service should inspect the complete hose siphon pump cover wastewater pump and model-specific sensing path when accessible checks do not clear E24.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Switch off before handling standing water
Switch the dishwasher off and disconnect its power safely before touching the filter or pump-cover area. Close the water tap if water is leaking outside the appliance.
Do not touch a wet plug socket extension lead or exposed electrical area.
Evidence: Siemens E24 dishwasher support
Clean the model-accessible filter and pump cover
Follow the exact Siemens user manual to clean the filter and check that the accessible pump cover is correctly seated. Remove only visible debris that the manual permits you to reach.
Sharp glass may be hidden in the sump. Wear suitable protection and never probe inaccessible pump parts.
Evidence: Siemens dishwasher error codes · Siemens E24 dishwasher support
Inspect the visible drain route
Check the accessible drain hose for a sharp bend or crushing and confirm that a recently fitted siphon or disposal connection was opened by the installer.
Do not pull a built-in dishwasher out or disconnect fixed plumbing.
Evidence: Siemens dishwasher error codes
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Virtual technician
Does E24 still appear after these checks?
This guided flow uses the exact code and your answers to choose a test, an expected result and the next branch.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Appliances
- Brand
- Siemens
- Product type
- Dishwashers
Known code variants
- Balay dishwasher E24
- Balay E24
- Bosch E24
- Bosch Fehler E24
- code erreur E24 lave-vaisselle Bosch
- code erreur E24 lave-vaisselle Siemens
- codice E24 Siemens
- código E24 Siemens
- E-24
- E24 lavavajillas Balay
- E:24
- erreur E24 Bosch
- erreur E24 Siemens
- Error E24 Balay
- error E24 lavavajillas Siemens
- errore E24 Bosch
- errore E24 lavastoviglie Siemens
- Fehlercode E24 Siemens
- microondas Whirlpool E24 sobrecalentamiento
- Siemens dishwasher E24
- Siemens E24
- Siemens F24
- Siemens Geschirrspüler Fehler E24
- Whirlpool E24 over the range
- Whirlpool microondas E24
- Whirlpool microwave E24
- Whirlpool microwave E24 overheat
- Whirlpool over the range E24
What it means
Siemens lists a blocked or kinked drain hose a sealed siphon connection an incorrectly fitted pump cover and a blocked wastewater pump as possible branches. The code alone does not prove pump failure.
Warnings and stop conditions
- Highsource verified
If E24 remains close the water tap switch the appliance off and contact Siemens Service. Stop immediately if water leaks outside the dishwasher or electrical parts are wet.
Evidence: Siemens E24 dishwasher support
Symptoms and causes
Probable causes · in order
- Dishwasher is not draining correctlyConfirmed
Siemens defines E24 as an incorrect drainage condition rather than a confirmed failed component.
Evidence: Siemens dishwasher error codes
- Accessible drain restrictionCommon
Siemens lists a blocked or kinked drain hose a sealed siphon connection an incorrectly fitted pump cover and a blocked wastewater pump as possible branches.
Evidence: Siemens dishwasher error codes · Siemens E24 dishwasher support
Sources and technical references
- 1
Siemens dishwasher error codes
Siemens · official_doc
- 2
Siemens E24 dishwasher support
Siemens · official_doc
Was this entry useful?