- Appliances
- Washing machines
F17
Siemens washer F17: water supply time exceeded
Evidence linked to this decision
View source: Siemens washing-machine error codes and messagesRisk level
Medium
Proceed carefully and stop if the check is unclear.
Urgency
Medium
Quick answer
F17 means the required water supply was not achieved within the permitted time. Use only the external checks below and stop if the code returns.
Safety first
Stop and check this first
- Close the tap and isolate power from a dry point if water leaks or filling continues while paused or switched off. Never loosen a hose under pressure.
Safe checks you can perform
- Confirm the connected tap is fully open
- Inspect the visible inlet hose
- Clean only a user-serviceable filter
Leave these tasks to a qualified professional
- Do not attempt this professional task: Measure inlet flow and level response
What a technician must be able to justify
A technician is coming
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Measure inlet flow and level response
What they doA technician should test supply pressure, valves, filters, pressure feedback, harnesses and control for the exact model.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Checks and evidence, step by step
Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
- 1
Confirm the connected tap is fully open
No special tools
Procedure
Check the correct domestic supply and look for wider low-pressure symptoms without loosening a pressurised hose.
Close the tap and isolate power from a dry point if water leaks or filling continues while paused or switched off. Never loosen a hose under pressure.
Evidence: Siemens washing-machine error codes and messages
- 2
Inspect the visible inlet hose
No special tools
Procedure
Straighten only an accessible kink and confirm the hose is not crushed; never defeat AquaStop.
Close the tap and isolate power from a dry point if water leaks or filling continues while paused or switched off. Never loosen a hose under pressure.
Evidence: Siemens washing-machine error codes and messages
- 3
Clean only a user-serviceable filter
No special tools
Procedure
With power isolated and the tap closed, follow the exact model manual; otherwise request service.
Close the tap and isolate power from a dry point if water leaks or filling continues while paused or switched off. Never loosen a hose under pressure.
Evidence: Siemens washing-machine error codes and messages
Virtual technician
Does F17 still appear after these checks?
This guided flow uses the exact code and your answers to choose a test, an expected result and the next branch.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Appliances
- Brand
- Siemens
- Product type
- Washing machines
Known code variants
- Bosch F17 lavadora
- Bosch F17 washer
- Bosch F29 lavadora
- Bosch F29 washer
- Bosch washer F17 error
- code erreur F17 lave-linge Siemens
- codice E17 Siemens
- código E17 Siemens
- E00-17
- erreur E17 Siemens
- error F17 lavadora Bosch
- error F17 lavadora Siemens
- errore F17 lavatrice Siemens
- F17 Siemens
- F29
- Siemens E17
- Siemens F17
- Siemens Fehlercode E17
- Siemens Waschmaschine Fehler F17
- Siemens washer F17
- Siemens washing machine E17
What it means
Official Siemens support associates F17, E17 and E00-17 on compatible washing machines with this condition: the required water supply was not achieved within the permitted time. This page is washer-specific; the same display on a dishwasher, dryer or another product can mean something else, and the exact E-Nr manual prevails.
Warnings and stop conditions
- Mediumsource verified
Close the tap and isolate power from a dry point if water leaks or filling continues while paused or switched off. Never loosen a hose under pressure.
Evidence: Siemens washing-machine error codes and messages
Symptoms and causes
Probable causes · in order
- The domestic water supply is restrictedConfirmed
A closed tap, low pressure, kinked hose or blocked inlet filter can delay filling.
Evidence: Siemens washing-machine error codes and messages
- The inlet valve, level feedback or control is faultyPossible
A normal tap flow does not rule out a valve, sensor, harness or protected-control fault.
Evidence: Siemens washing-machine error codes and messages
Sources and technical references
- 1
Siemens washing-machine error codes and messages
BSH Home Appliances / Siemens · 2026 · official_doc
Was this entry useful?