- Printers
- Laser printer
jam-mp-tray
Brother MFC-L8900CDW: Jam MP Tray
Risk level
Medium
Proceed carefully and stop if the check is unclear.
Urgency
High
Quick answer
Brother defines “Jam MP Tray” as: Paper is jammed in or around the multipurpose tray. That message alone does not prove a replacement part. The next useful discriminator is media type/orientation, guide position and whether one fresh sheet is detected from the MP tray.
Safety first
Stop and check this first
- Never pull against strong resistance or reach into moving rollers.
Safe checks you can perform
- Preserve the exact display and context
- Run one controlled owner-safe discriminator
- Stop at the proved owner/service boundary
Leave these tasks to a qualified professional
- Do not attempt this professional task: Measured handoff for Jam MP Tray
What a technician must be able to justify
Technician visit
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Measured handoff for Jam MP Tray
What they doReproduce at the named location with known-good media, inspect pickup/separation rollers, sensor flags and fragments, and document the failed component before replacement.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Preserve the exact display and context
Photograph “Jam MP Tray”, including any tray, color or ## suffix. Save model/region, page count, supplies-life page, job/media and the last intervention before clearing it.
Never pull against strong resistance or reach into moving rollers.
Evidence: Brother MFC-L8900CDW Online User's Guide - error and maintenance messages
Run one controlled owner-safe discriminator
Follow the LCD animation, remove only visible loose paper in its travel direction, inspect for fragments and retest with one flat fresh supported sheet. Record media type/orientation, guide position and whether one fresh sheet is detected from the MP tray; change only one variable before retesting.
Never pull against strong resistance or reach into moving rollers.
Evidence: Brother MFC-L8900CDW Online User's Guide - error and maintenance messages
Stop at the proved owner/service boundary
- If the same location repeats with reference media, stop clearing:
- the located feed/sensor path needs service. A torn or unsupported document/media stays in the loading branch.
Never pull against strong resistance or reach into moving rollers.
Evidence: Brother MFC-L8900CDW Online User's Guide - error and maintenance messages
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Printers
- Brand
- Brother
- Product type
- Laser printer
Known code variants
- Atasco bandeja MP
- Bourrage bac MU
- Brother Atasco bandeja MP
- Brother Bourrage bac MU
- Brother Inceppamento vassoio MU
- Brother Jam MP Tray
- Brother Stau MF-Zufuhr
- Inceppamento vassoio MU
- Jam MP Tray
- MFC-L8900CDW Atasco bandeja MP
- MFC-L8900CDW Bourrage bac MU
- MFC-L8900CDW Inceppamento vassoio MU
- MFC-L8900CDW Jam MP Tray
- MFC-L8900CDW Stau MF-Zufuhr
- Stau MF-Zufuhr
What it means
Official meaning: Paper is jammed in or around the multipurpose tray. Decision boundary: record media type/orientation, guide position and whether one fresh sheet is detected from the MP tray. Service or purchase proof: Reproduce at the named location with known-good media, inspect pickup/separation rollers, sensor flags and fragments, and document the failed component before replacement.
Warnings and stop conditions
- Mediumsource verified
Never pull against strong resistance or reach into moving rollers.
Evidence: Brother MFC-L8900CDW Online User's Guide - error and maintenance messages
Symptoms and causes
Probable causes · in order
- What the Brother message establishesConfirmed
The official Brother MFC-L8900CDW family guide defines “Jam MP Tray”: Paper is jammed in or around the multipurpose tray.
Evidence: Brother MFC-L8900CDW Online User's Guide - error and maintenance messages
- The observation that changes the next branchPossible
Capture media type/orientation, guide position and whether one fresh sheet is detected from the MP tray. If the same location repeats with reference media, stop clearing: the located feed/sensor path needs service. A torn or unsupported document/media stays in the loading branch.
Evidence: Brother MFC-L8900CDW Online User's Guide - error and maintenance messages
Virtual technician
Does jam-mp-tray still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
Brother MFC-L8900CDW Online User's Guide - error and maintenance messages
Brother Industries, Ltd. · 2021 · official_doc
Was this entry useful?