- Garden
- Robot lawnmower
Lifted
Husqvarna Automower 'Lifted': robot mower lift sensor triggered
Risk level
Medium
Proceed carefully and stop if the check is unclear.
Urgency
Medium
Quick answer
The Automower lift sensor has been activated. Husqvarna says to check that the body moves freely on the chassis and to remove or isolate objects that lift the mower. Switch it off and wear gloves before touching it; if it persists, use authorised service.
Safety first
Stop and check this first
- Never bypass, block or tape over the lift sensor: it protects against the blades. Do not lift or move the mower while it is on and never put hands or feet underneath while it runs. Do not use it with the body removed.
Safe checks you can perform
- Switch the mower off before touching it
- Body moves freely
- Objects lifting the chassis
Leave these tasks to a qualified professional
- Do not attempt this professional task: Installation adjustment
- Do not attempt this professional task: Lift sensor diagnosis
What a technician must be able to justify
Technician visit
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Installation adjustment
What they doIf the mower is always lifted in the same place, the dealer isolates the fixed obstacle with an island or changes the wire route.
They must show youthe mower crossing the area without stopping.
In writingthe changes made to the installation.
Lift sensor diagnosis
What they doThe authorised technician tests the lift sensor and how the body is mounted on the chassis, without bypassing the sensor, and replaces only what is proven faulty.
They must show youthe sensor test before and after the repair.
In writingthe part replaced, that it is original, and that the sensor works.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Switch the mower off before touching it
- Who:
- you.
- How:
- push STOP, hold the ON/OFF button for 3 seconds and confirm the keypad lamp is off; the mower is then disabled. Put on protective gloves, because the blades are sharp.
- Result that matters:
- being able to inspect the mower with no risk of it starting.
- If the keypad lamp is still lit:
- repeat the long press until it goes out.
- If the mower is disabled:
- go on to the body check.
- Evidence to keep:
- photo of the display with the message before switching off.
Evidence: Husqvarna Automower 405X/415X Operator's manual (1650-006 EN)
Body moves freely
- Who:
- you, with the mower off and wearing gloves.
- How:
- with the mower on the ground, gently push the body in several directions and check that it moves freely around the chassis and returns, with no grass or objects jamming it.
- Result that matters:
- the body not sticking and holding the sensor up.
- If it was jammed by dirt:
- clean with a brush or damp cloth, never a pressure washer.
- If it moves freely:
- look on the lawn for what lifts the mower.
- Evidence to keep:
- short video of the body moving.
Evidence: Husqvarna Automower 405X/415X Operator's manual (1650-006 EN)
Objects lifting the chassis
- Who:
- you, walking the garden.
- How:
- where it stopped, look for roots, stones, edges or toys the mower can ride up on. Remove them or, if they are fixed, create an island with the boundary wire as the manual explains.
- Result that matters:
- removing what triggers the lift sensor.
- If you find the object and the message stops:
- solved.
- If there are no obstacles and the message persists:
- contact an authorised service technician.
- Evidence to keep:
- photo of the object found or the spot where it stopped.
Evidence: Husqvarna Automower 405X/415X Operator's manual (1650-006 EN)
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Garden
- Brand
- Husqvarna
- Product type
- Robot lawnmower
Known code variants
- Automower 415X Lifted
- Automower levantado
- Automower lift sensor
- Automower Lifted
- Gardena robot mower lift sensor
- Gardena SILENO levantado
- Gardena SILENO lifted
- Husqvarna Automower levantado
- Husqvarna Automower lifted
- Husqvarna robot mower lifted error
- Levantado
- Lifted
- robot cortacésped Husqvarna levantado
- robot Gardena sensor de elevación
- sensor de elevación Automower
- SILENO city levantado
- SILENO city lifted
- SILENO life levantado
- SILENO life lifted
What it means
In the Husqvarna Automower 405X/415X operator's manual (1650-006, 2023), 'Lifted' means the lift sensor has been activated because the mower has been lifted. Husqvarna says to check that the body can move freely around its chassis, to remove objects that can cause the chassis to be lifted or create an island around them and, if the problem stays, to speak to an authorised service technician. It is different from the 'Alarm! Mower lifted' message. Other models may differ; the message alone does not prove a fault.
Warnings and stop conditions
- Higheditorial warning
Never bypass, block or tape over the lift sensor: it protects against the blades. Do not lift or move the mower while it is on and never put hands or feet underneath while it runs. Do not use it with the body removed.
Evidence: Husqvarna Automower 405X/415X Operator's manual (1650-006 EN)
Symptoms and causes
Probable causes · in order
- The mower was actually liftedCommon
Someone picked it up, or a child or animal moved it; the lift sensor reacts and the mower stops.
Evidence: Husqvarna Automower 405X/415X Operator's manual (1650-006 EN)
- Objects lifting the chassisCommon
Roots, stones, kerbs or other objects on the lawn can cause the chassis to lift when the mower drives over them, according to the manual.
Evidence: Husqvarna Automower 405X/415X Operator's manual (1650-006 EN)
- Body not moving freelyPossible
Husqvarna asks you to check that the body moves freely around the chassis; if it sticks, the sensor can be triggered.
Evidence: Husqvarna Automower 405X/415X Operator's manual (1650-006 EN)
- Sensor faultLess common
If the message keeps appearing with the body free and no obstacles, the manual refers you to an authorised service technician.
Evidence: Husqvarna Automower 405X/415X Operator's manual (1650-006 EN)
Virtual technician
Does Lifted still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
Husqvarna Automower 405X/415X Operator's manual (1650-006 EN)
Husqvarna · 2023 · manual
- 2
Husqvarna Automower 405X/415X Manual de usuario (1650-006 ES)
Husqvarna · 2023 · manual
Was this entry useful?