- Electric mobility
- Electric bicycle
112000
Bosch eBike 112000: Connection to your smartphone has not worked.
Risk level
Medium
Proceed carefully and stop if the check is unclear.
Urgency
High
Quick answer
Connection to your smartphone has not worked. An error has occurred when connecting your smartphone with your eBike. Restart the connection process. For 112000, Bosch's user step is: Please log in to the app again and connect your smartphone. If the problem persists: Reinstall the app and then start your eBike. Then connect your smartphone with your eBike. If the problem persists, please contact your specialist dealer. If the same code returns, preserve the display and stop repeating resets.
Safety first
Stop and check this first
- Do not open powered components or bypass sensors. Stop riding if assistance, braking, lighting or controls behave unpredictably, or if there is heat, smell, damage or moisture.
Safe checks you can perform
- Preserve the code before changing anything
- Apply only Bosch's published user step
- Use recurrence as the stop point
Leave these tasks to a qualified professional
- Do not attempt this professional task: Measured handoff for 112000
What a technician must be able to justify
A technician is coming
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Measured handoff for 112000
What they doUse the saved timing, system generation and Bosch diagnostics to test Control unit in the state that produced 112000; verify software, connectors and component values before replacement.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Checks and evidence, step by step
Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
- 1
Preserve the code before changing anything
No special tools
Procedure
Photograph 112000. Record the eBike model, Bosch system generation if known, battery level, Control unit, what stopped working and when the code appeared.
Do not open powered components or bypass sensors. Stop riding if assistance, braking, lighting or controls behave unpredictably, or if there is heat, smell, damage or moisture.
Evidence: Bosch eBike Systems — official fault code 112000
- 2
Apply only Bosch's published user step
No special tools
Procedure
Please log in to the app again and connect your smartphone. If the problem persists: Reinstall the app and then start your eBike. Then connect your smartphone with your eBike. If the problem persists, please contact your specialist dealer. Record whether the condition “Connection to your smartphone has not worked.” disappears and whether 112000 reappears after the exact published step. Do not add an undocumented reset or open a component.
Do not open powered components or bypass sensors. Stop riding if assistance, braking, lighting or controls behave unpredictably, or if there is heat, smell, damage or moisture.
Evidence: Bosch eBike Systems — official fault code 112000
- 3
Use recurrence as the stop point
No special tools
Procedure
If 112000 remains absent, monitor the same function; that does not prove a repair. If “Connection to your smartphone has not worked.” or 112000 returns, stop the user checks and book a Bosch eBike specialist.
Do not open powered components or bypass sensors. Stop riding if assistance, braking, lighting or controls behave unpredictably, or if there is heat, smell, damage or moisture.
Evidence: Bosch eBike Systems — official fault code 112000
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Electric mobility
- Brand
- Bosch eBike Systems
- Product type
- Electric bicycle
Known code variants
- Bosch 112000 bici elettrica
- Bosch 112000 bicicleta eléctrica
- Bosch 112000 E-Bike
- Bosch 112000 eBike
- Bosch 112000 vélo électrique
- Bosch eBike code 112000
- Bosch eBike error 112000
- Bosch eBike Fehler 112000
- Bosch eBike Fehlercode 112000
- code Bosch eBike 112000
- codice Bosch eBike 112000
- código Bosch eBike 112000
- erreur Bosch eBike 112000
- error Bosch eBike 112000
- errore Bosch eBike 112000
What it means
Bosch eBike Systems assigns 112000 to Control unit with source severity ERROR. It reports the detected state, not proof that one particular part has failed. An error has occurred when connecting your smartphone with your eBike. Restart the connection process.
Warnings and stop conditions
- Mediumsource verified
Do not open powered components or bypass sensors. Stop riding if assistance, braking, lighting or controls behave unpredictably, or if there is heat, smell, damage or moisture.
Evidence: Bosch eBike Systems — official fault code 112000
Symptoms and causes
Probable causes · in order
- What the code establishesConfirmed
Bosch identifies 112000 at Control unit: Connection to your smartphone has not worked. Keep that meaning scoped to a Bosch eBike system and the exact code shown.
Evidence: Bosch eBike Systems — official fault code 112000
- What the official step decidesPossible
If “Connection to your smartphone has not worked.” clears after Bosch's exact step, only the current condition has cleared; no failed part has been proved. If 112000 returns, the documented user branch is exhausted and the recurrence becomes the evidence for service.
Evidence: Bosch eBike Systems — official fault code 112000
Virtual technician
Does 112000 still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
Bosch eBike Systems — official fault code 112000
Bosch eBike Systems · 2026 · official_doc
Was this entry useful?