Independent technical referenceOfficial site
  • Gaming and consoles
  • Nintendo Switch

2110-1115

Nintendo 2110-1115 on Nintendo Switch: cannot connect to a wired or wireless network

Verified with sources1 sourceReviewed Oct 3, 2026
Technician coming? See the 2 steps they must show you
Nintendo Switch (OLED model) console with white Joy-Con
PantheraLeo1359531CC BY 4.0Image source

Risk level

Low

Usually safe to check without specialist tools.

Urgency

Low

Quick answer

2110-1115 appears when the console cannot connect to a wired or wireless network. For wired, check that both ends of the Ethernet cable are secure; for wireless, move closer to the router and remove interference.

Safety first

Stop and check this first

  • Nintendo notes that a wired connection needs a USB LAN adapter when the dock has no LAN port, and that Nintendo Switch Lite needs a licensed accessory to use one.

Safe checks you can perform

  • Wired: check the Ethernet cable, another cable and another port
  • Move the console closer and remove interference
  • Restart the console and the home network, then create a new connection

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Router manufacturer
  • Do not attempt this professional task: Nintendo repair service

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Router manufacturer

    What they doHelps you update the wireless router firmware or reset the router to its factory default settings.

    In writingthe firmware version before and after, and whether the router was reset.

  2. Nintendo repair service

    What they doNintendo tests the console when it still cannot connect after the network and router steps after you book a repair from its support page.

    They must show youwhat test reproduced the fault.

    In writingwhat was repaired or replaced and the result of the test after the repair.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. Wired: check the Ethernet cable, another cable and another port

    No special tools

    Who:
    you.
    How:
    make sure both ends of the Ethernet cable fit securely in the LAN adapter or dock LAN port and in the router or modem. If it fails, try a different cable and then a different port on the router.
    Result that matters:
    whether the test passes with another cable or port.
    If another cable works:
    the first cable is likely damaged.
    If nothing changes:
    restart the console and the home network.
    Evidence to keep:
    which cable and port you used for each test.

    Evidence: Nintendo Switch error code 2110-1115

  2. Move the console closer and remove interference

    No special tools

    Who:
    you.
    How:
    take the console out of the dock and place it within 3 to 4 metres (10 to 15 feet) from the wireless router while you test. Move filing cabinets, speakers, power strips, glass or cordless phones away from the console and the router.
    Result that matters:
    whether the connection test passes with a stronger signal.
    If it passes close to the router:
    signal strength or interference is the likely cause.
    If it fails even next to the router:
    continue with the network restart and a new connection.
    Evidence to keep:
    where the console was and the result of each test.

    Evidence: Nintendo Switch error code 2110-1115

  3. Restart the console and the home network, then create a new connection

    No special tools

    Who:
    you.
    How:
    restart the console (POWER for three seconds, Power Options, Restart). Restart the network devices and check other devices are online before testing. On wireless, set up a new internet connection to the correct network.
    Result that matters:
    the console connection test after these restarts.
    If it passes:
    the devices were not responding.
    If it fails while other devices connect:
    contact the router manufacturer, and if needed book a Nintendo repair.
    Evidence to keep:
    test results and whether other devices were online.

    Evidence: Nintendo Switch error code 2110-1115

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Gaming and consoles
Brand
Nintendo
Product type
Nintendo Switch

Known code variants

  • código error Switch 2110-1115
  • error Nintendo 2110-1115
  • Nintendo error 2110-1115
  • Nintendo Switch 2110-1115
  • Switch 2 2110-1115
  • Switch error code 2110-1115

What it means

Nintendo documents 2110-1115 when a Nintendo Switch 2 or Nintendo Switch cannot connect to a wired or wireless network, and splits the steps by connection type. Wired: a secure Ethernet cable at both ends, a restart, a network restart, another cable and another router port. Wireless: distance to the router, interference, a restart, a network restart and a new connection. Router firmware or reset goes to its manufacturer; if the console still fails, Nintendo offers a repair.

Warnings and stop conditions

  • Lowsource verified

    Nintendo notes that a wired connection needs a USB LAN adapter when the dock has no LAN port, and that Nintendo Switch Lite needs a licensed accessory to use one.

    Evidence: Nintendo Switch error code 2110-1115

Symptoms and causes

Probable causes · in order

  • Loose or damaged Ethernet cablePossible

    Wired only: a cable end does not stay secure, or a second cable works.

    Evidence: Nintendo Switch error code 2110-1115

  • Router port or unresponsive network devicesPossible

    Another port on the router works, or the network restart solves it.

    Evidence: Nintendo Switch error code 2110-1115

  • Weak signal or interferenceCommon

    Wireless only: the connection works closer to the router or after moving metal objects and electronics away.

    Evidence: Nintendo Switch error code 2110-1115

  • Console fault after all network stepsLess common

    The console fails on every network and cable while other devices connect; Nintendo then offers a repair.

    Evidence: Nintendo Switch error code 2110-1115

Virtual technician

Does 2110-1115 still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Sources and technical references

  1. 1

    Nintendo Switch error code 2110-1115

    Nintendo UK Support · 2026 · official_doc

Sources: Nintendo Switch error code 2110-1115reviewed 2026-10-03 · verified

Was this entry useful?