- Gaming and consoles
- Nintendo Switch
2203-0025
Nintendo 2203-0025 on Nintendo Switch: local communication failure
Risk level
Low
Usually safe to check without specialist tools.
Urgency
Medium
Quick answer
The console showed 2203-0025 while using local communication, for example during a transfer. Attach the Joy-Con to the console, restart the source console (or both during a transfer) and check that every console can connect to the internet over Wi-Fi.
Safety first
Stop and check this first
- Do not open the console or its antennas to look for the communication fault; repair is done by Nintendo's service centre.
Safe checks you can perform
- Attach the controllers and restart
- Check Wi-Fi and local communication on each console
- Bring the consoles closer and retry the transfer
Leave these tasks to a qualified professional
- Do not attempt this professional task: Repair by Nintendo's service centre
- Do not attempt this professional task: Per-console results for the request
What a technician must be able to justify
Technician visit
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Repair by Nintendo's service centre
What they doIf 2203-0025 persists, Nintendo asks for the console that cannot use local communication to be repaired, or all affected consoles if it is unclear which fails.
They must show youthe local communication test with each console and the result after repair.
In writingWhich console was repaired, the diagnosis, any part replaced and the reason.
Per-console results for the request
What they doState which console did not connect over Wi-Fi or failed local communication, so working consoles are not sent.
They must show youhow they identified the failing console.
In writingThe consoles received and the result for each.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Attach the controllers and restart
- Who:
- you.
- How:
- Attach the Joy-Con 2 or Joy-Con to the console. Restart the source console (POWER at least three seconds > Power Options > Restart); during a transfer, restart both.
- Result that matters:
- Whether local communication works after the restart.
- If it works:
- it was a temporary state.
- If 2203-0025 returns:
- check each console's wireless connection.
- Evidence to keep:
- Which consoles you restarted and the result.
Evidence: Nintendo Switch error code 2203-0025 (Nintendo UK Support)
Check Wi-Fi and local communication on each console
- Who:
- you.
- How:
- Connect each console to the internet over Wi-Fi and check local communication on each one with Nintendo's guides for Switch 2 and Switch.
- Result that matters:
- Which console fails to connect over Wi-Fi or to use local communication.
- If all work:
- bring the consoles closer and repeat.
- If one fails:
- that is the console to look at.
- Evidence to keep:
- The result for each console separately.
Evidence: Nintendo Switch error code 2203-0025 (Nintendo UK Support)
Bring the consoles closer and retry the transfer
- Who:
- you.
- How:
- Place the consoles as close together as possible and retry the transfer or local session.
- Result that matters:
- Whether it completes without error.
- If it completes:
- distance or interference was the cause.
- If it fails:
- Nintendo says to repair the console that cannot use local communication.
- Evidence to keep:
- The approximate distance and the result.
Evidence: Nintendo Switch error code 2203-0025 (Nintendo UK Support)
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Gaming and consoles
- Brand
- Nintendo
- Product type
- Nintendo Switch
Known code variants
- código de error 2203-0025 Switch
- error 2203-0025 Nintendo Switch
- error de comunicación local 2203-0025
- local communication error 2203-0025
- Nintendo error 2203-0025
- Nintendo Switch 2203-0025
- Switch 2 2203-0025
- Switch error code 2203-0025
What it means
Nintendo documents 2203-0025 when using local communication between Nintendo Switch 2 or Nintendo Switch consoles, including during a transfer. It asks you to keep the Joy-Con 2 or Joy-Con attached to avoid interference, restart the source console or both, check that all of them connect to the internet wirelessly, verify local communication on each and bring them closer. If it persists, the console that cannot use local communication must be repaired; if it is unclear which one, all affected consoles. The code does not point to a part.
Warnings and stop conditions
- Loweditorial warning
Do not open the console or its antennas to look for the communication fault; repair is done by Nintendo's service centre.
Evidence: Nintendo Switch error code 2203-0025 (Nintendo UK Support)
Symptoms and causes
Probable causes · in order
- Temporary state on one consolePossible
Ruled out by restarting the source console, or both during a transfer. If it then works, stop there.
Evidence: Nintendo Switch error code 2203-0025 (Nintendo UK Support)
- Interference or distance between consolesPossible
Nintendo asks you to attach the controllers and bring the consoles together. If that works, the signal between them was the cause.
Evidence: Nintendo Switch error code 2203-0025 (Nintendo UK Support)
- Wireless communication on one consolePossible
If one console cannot connect to the internet over Wi-Fi or its local communication does not work, the fault is in that console; Nintendo asks for it to be repaired if it persists.
Evidence: Nintendo Switch error code 2203-0025 (Nintendo UK Support)
Virtual technician
Does 2203-0025 still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
Nintendo Switch error code 2203-0025 (Nintendo UK Support)
Nintendo UK Support · 2026 · official_doc
Was this entry useful?