Independent technical referenceOfficial site
  • Gaming and consoles
  • Nintendo Switch

2206-0092

Nintendo 2206-0092 on Nintendo Switch: transfer to Switch 2 fails

Verified with sources1 sourceReviewed Oct 4, 2026
Technician coming? See the 2 steps they must show you
Nintendo Switch (OLED model) console with white Joy-Con
PantheraLeo1359531CC BY 4.0Image source

Risk level

Low

Usually safe to check without specialist tools.

Urgency

Low

Quick answer

The system transfer from Nintendo Switch to Nintendo Switch 2 stopped with 2206-0092. Hold POWER for 12 seconds on both consoles and remove the microSD card from the source Switch before powering them on again.

Safety first

Stop and check this first

  • Do not remove the microSD card with the console on: Nintendo asks you to power off both consoles first by holding POWER for 12 seconds.

Safe checks you can perform

  • Power off both consoles and remove the source microSD
  • Cancel the pending transfer
  • Start the transfer from the beginning

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Nintendo Customer Support
  • Do not attempt this professional task: Transfer details for support

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Nintendo Customer Support

    What they doIf 2206-0092 persists after removing the card and restarting the transfer, Nintendo asks you to contact its Customer Support.

    They must show youwhat they checked in the transfer and what cause they found.

    In writingThe case number, the date and the agreed steps.

  2. Transfer details for support

    What they doState that you removed the microSD card from the source console, that you cancelled the transfer and where the new one stopped.

    They must show youfrom which point they pick up the case.

    In writingWhat you agree, with the date and case number.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. Power off both consoles and remove the source microSD

    No special tools

    Who:
    you.
    How:
    Hold POWER for 12 seconds on each console to turn them off. With both off, remove the microSD card from the source Nintendo Switch.
    Result that matters:
    That both consoles are off and the card is out before going on.
    If they power off:
    go on to power them on and cancel.
    If either does not power off after 12 seconds:
    note it for Customer Support.
    Evidence to keep:
    A photo of the code and of the removed card, with its capacity.

    Evidence: Nintendo Switch error code 2206-0092 (Nintendo UK Support)

  2. Cancel the pending transfer

    No special tools

    Who:
    you.
    How:
    Power on both consoles with POWER. On the screen about resuming the system transfer, hold the Left or Right Stick together with the + or - Button on the controller for about two seconds.
    Result that matters:
    Whether the pending transfer is cancelled.
    If it is:
    start the transfer again.
    If it is not:
    contact Nintendo's Customer Support.
    Evidence to keep:
    A photo of the screen before and after cancelling.

    Evidence: Nintendo Switch error code 2206-0092 (Nintendo UK Support)

  3. Start the transfer from the beginning

    No special tools

    Who:
    you.
    How:
    With the microSD card still out of the source console, start the system transfer over again from the beginning.
    Result that matters:
    Whether the transfer completes without 2206-0092.
    If it completes:
    the card in the source console was blocking it.
    If the error returns:
    contact Nintendo's Customer Support.
    Evidence to keep:
    The time of the attempt and where it stopped, if it did.

    Evidence: Nintendo Switch error code 2206-0092 (Nintendo UK Support)

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Gaming and consoles
Brand
Nintendo
Product type
Nintendo Switch

Known code variants

  • código de error 2206-0092 Switch
  • error 2206-0092 Nintendo Switch
  • error 2206-0092 system transfer to Nintendo Switch 2
  • error 2206-0092 transferencia a Nintendo Switch 2
  • Nintendo error 2206-0092
  • Nintendo Switch 2206-0092
  • Switch 2 2206-0092
  • Switch error code 2206-0092

What it means

Nintendo documents 2206-0092 when performing a system transfer from Nintendo Switch to Nintendo Switch 2. What sets its steps apart is the source console's microSD memory card: power both off, remove it from the Nintendo Switch, power both on, cancel the pending transfer with a stick and the + or - Button for about two seconds, and start it over from the beginning. If it persists, Nintendo refers you to its Customer Support. The code does not indicate a broken card.

Warnings and stop conditions

  • Loweditorial warning

    Do not remove the microSD card with the console on: Nintendo asks you to power off both consoles first by holding POWER for 12 seconds.

    Evidence: Nintendo Switch error code 2206-0092 (Nintendo UK Support)

Symptoms and causes

Probable causes · in order

  • microSD card in the source consolePossible

    Nintendo asks you to remove it before restarting; if the new transfer completes without it, that was the difference.

    Evidence: Nintendo Switch error code 2206-0092 (Nintendo UK Support)

  • Earlier transfer left half donePossible

    At power on the console offers to resume it; Nintendo asks you to cancel it and start from scratch instead.

    Evidence: Nintendo Switch error code 2206-0092 (Nintendo UK Support)

  • Problem the steps do not solvePossible

    If the error returns in the new transfer, Nintendo refers you to its Customer Support.

    Evidence: Nintendo Switch error code 2206-0092 (Nintendo UK Support)

Virtual technician

Does 2206-0092 still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Sources and technical references

  1. 1

    Nintendo Switch error code 2206-0092 (Nintendo UK Support)

    Nintendo UK Support · 2026 · official_doc

Sources: Nintendo Switch error code 2206-0092 (Nintendo UK Support)reviewed 2026-10-04 · verified

Was this entry useful?