Independent technical referenceOfficial site
  • Gaming and consoles
  • Nintendo Switch

2206-1014

Nintendo 2206-1014 on Nintendo Switch: error during or after the system update

Verified with sources1 sourceReviewed Oct 3, 2026
Technician coming? See the 2 steps they must show you
Nintendo Switch (OLED model) console with white Joy-Con
PantheraLeo1359531CC BY 4.0Image source

Risk level

Medium

Proceed carefully and stop if the check is unclear.

Urgency

Medium

Quick answer

The console showed 2206-1014 (or 2206-1015) while updating. Nintendo is aware of the issue with system version 20.0.0: power off, turn the console on holding volume + and - until recovery mode appears, and choose Update System.

Safety first

Stop and check this first

  • Do not turn the console off while the update installs in recovery mode; let the process finish.
  • Do not try to bypass the Parental Controls PIN: Nintendo only provides for resetting it through its procedure.

Safe checks you can perform

  • Enter recovery mode
  • Update from recovery mode
  • Enter the Parental Controls PIN if asked

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Nintendo support
  • Do not attempt this professional task: Parental Controls PIN reset

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Nintendo support

    What they doIf the update from recovery mode does not finish or the error persists, Nintendo support decides the next step.

    They must show youwhich steps they repeated and the result with the installed version.

    In writingThe case number, the system version and the next step.

  2. Parental Controls PIN reset

    What they doIf nobody remembers the PIN, the responsible adult resets it through Nintendo's official procedure.

    They must show youthe confirmation of the reset through Nintendo's channel.

    In writingThe reset date and who requested it.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. Enter recovery mode

    No special tools

    Who:
    you.
    How:
    Power the console off. With it off, hold the volume up (+) and volume down (-) buttons and press POWER. Keep holding the volume buttons until the recovery mode menu appears.
    Result that matters:
    That the recovery mode menu is shown.
    If it appears:
    go on to Update System.
    If the console starts normally:
    power it off and repeat, holding volume from the start.
    Evidence to keep:
    A photo of the recovery menu.

    Evidence: Nintendo Switch error code 2206-1014 (Nintendo UK Support)

  2. Update from recovery mode

    No special tools

    Who:
    you.
    How:
    In recovery mode, choose Update System and follow the prompts to the end.
    Result that matters:
    That the update finishes and the console starts without 2206-1014.
    If it finishes:
    the update problem is solved.
    If it stops or the error remains:
    the page gives no further steps; note where it failed for Nintendo support.
    Evidence to keep:
    The version installed at the end and whether the error returned.

    Evidence: Nintendo Switch error code 2206-1014 (Nintendo UK Support)

  3. Enter the Parental Controls PIN if asked

    No special tools

    Who:
    you, or the adult who set up Parental Controls.
    How:
    If the process asks for the Parental Controls PIN, enter it. If it was forgotten, reset it with Nintendo's procedure for that PIN.
    Result that matters:
    Being able to continue the update.
    If the PIN is accepted:
    finish the update.
    If you do not remember it:
    reset it first and go back to recovery mode.
    Evidence to keep:
    Whether a PIN was requested and how it was handled.

    Evidence: Nintendo Switch error code 2206-1014 (Nintendo UK Support)

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Gaming and consoles
Brand
Nintendo
Product type
Nintendo Switch

Known code variants

  • código de error 2206-1014 Switch
  • error 2206-1014 Nintendo Switch
  • error al actualizar la consola 2206-1014
  • error during a system update 2206-1014
  • Nintendo error 2206-1014
  • Nintendo Switch 2206-1014
  • Switch 2 2206-1014
  • Switch error code 2206-1014

What it means

Nintendo reports that 2206-1014 and 2206-1015 may appear during or after installing system version 20.0.0. Its fix is to repeat the update from recovery mode, reached by turning the console on with the volume up and volume down buttons held. If the console has a Parental Controls PIN, it asks for it to continue; if it was forgotten, it has to be reset through Nintendo's procedure. The page does not mention repair and the code does not indicate a faulty part.

Warnings and stop conditions

  • Mediumeditorial warning

    Do not turn the console off while the update installs in recovery mode; let the process finish.

    Evidence: Nintendo Switch error code 2206-1014 (Nintendo UK Support)

  • Loweditorial warning

    Do not try to bypass the Parental Controls PIN: Nintendo only provides for resetting it through its procedure.

    Evidence: Nintendo Switch error code 2206-1014 (Nintendo UK Support)

Symptoms and causes

Probable causes · in order

  • Known issue with version 20.0.0Common

    Nintendo acknowledges the issue during or after installing that version. If the error appeared while updating to 20.0.0, it matches the case described.

    Evidence: Nintendo Switch error code 2206-1014 (Nintendo UK Support)

  • Update that did not complete properlyPossible

    Fixed by repeating the update from recovery mode. If the console starts normally afterwards, nothing more is needed.

    Evidence: Nintendo Switch error code 2206-1014 (Nintendo UK Support)

Virtual technician

Does 2206-1014 still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Sources and technical references

  1. 1

    Nintendo Switch error code 2206-1014 (Nintendo UK Support)

    Nintendo UK Support · 2026 · official_doc

Sources: Nintendo Switch error code 2206-1014 (Nintendo UK Support)reviewed 2026-10-03 · verified

Was this entry useful?