- Appliances
- Dryers
ERR
AEG dryer ERR: option not allowed in current cycle
Risk level
Low
Usually safe to check without specialist tools.
Urgency
Low
Quick answer
ERR means this display usually means an option or programme change is not allowed after the cycle has started—not a failed component. Preserve the full display and model, then use the option pressed, selected cycle and whether ERR appears only after the cycle has begun to choose the next branch before any part or paid repair.
Safety first
Stop and check this first
- Stop immediately for water near electricity, smoke, burning smell, abnormal heat, damaged cable or repeated breaker trips. Close the water tap when a leak is possible; sealed water, heat and mains circuits are professional-only.
Safe checks you can perform
- Capture the decision evidence
- Run the one discriminating check
- Stop at the result boundary
Leave these tasks to a qualified professional
- Do not attempt this professional task: Evidence-led AEG handoff for ERR
What a technician must be able to justify
Technician visit
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Evidence-led AEG handoff for ERR
What they doA qualified technician should test option compatibility, cycle state, selector/keypad input or software, using the exact model/PNC and the recorded result for the option pressed, selected cycle and whether ERR appears only after the cycle has begun.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Capture the decision evidence
Photograph ERR, the complete message and model/PNC. Record the failed programme stage and the option pressed, selected cycle and whether ERR appears only after the cycle has begun. Do not clear the history repeatedly.
Stop immediately for water near electricity, smoke, burning smell, abnormal heat, damaged cable or repeated breaker trips. Close the water tap when a leak is possible; sealed water, heat and mains circuits are professional-only.
Evidence: AEG France — dryer ERR option-state message
Run the one discriminating check
Turn the dryer off, select the intended cycle and compatible options before starting, then run once. Use the exact manual's option table; do not reset settings repeatedly.
Stop immediately for water near electricity, smoke, burning smell, abnormal heat, damaged cable or repeated breaker trips. Close the water tap when a leak is possible; sealed water, heat and mains circuits are professional-only.
Evidence: AEG France — dryer ERR option-state message
Stop at the result boundary
ERR only on an incompatible mid-cycle change is normal option logic. ERR before start with a documented compatible option selects selector/keypad/software support; no repair or part purchase follows from the text alone. If the same result returns after this one controlled pass, stop rather than chaining resets or cycles.
Stop immediately for water near electricity, smoke, burning smell, abnormal heat, damaged cable or repeated breaker trips. Close the water tap when a leak is possible; sealed water, heat and mains circuits are professional-only.
Evidence: AEG France — dryer ERR option-state message
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Appliances
- Brand
- AEG
- Product type
- Dryers
Known code variants
- AEG asciugatrice ERR
- AEG dryer ERR
- AEG ERR error
- AEG Fehler ERR
- AEG secadora ERR
- AEG sèche-linge ERR
- AEG Trockner ERR
- code erreur AEG ERR
- ERR AEG asciugatrice
- ERR AEG dryer
- ERR AEG secadora
- ERR AEG sèche-linge
- ERR AEG Trockner
- error AEG ERR
- errore AEG ERR
What it means
AEG's official French support documents ERR on the dryer as follows: this display usually means an option or programme change is not allowed after the cycle has started—not a failed component. The exact model manual controls compatibility; the same code on another appliance can mean something else.
Warnings and stop conditions
- Mediumsource verified
Stop immediately for water near electricity, smoke, burning smell, abnormal heat, damaged cable or repeated breaker trips. Close the water tap when a leak is possible; sealed water, heat and mains circuits are professional-only.
Evidence: AEG France — dryer ERR option-state message
Symptoms and causes
Probable causes · in order
- Official AEG meaningConfirmed
AEG's official French support documents ERR on the dryer as follows: this display usually means an option or programme change is not allowed after the cycle has started—not a failed component. The exact model manual controls compatibility; the same code on another appliance can mean something else.
Evidence: AEG France — dryer ERR option-state message
- What still has to be separatedPossible
option compatibility, cycle state, selector/keypad input or software
Evidence: AEG France — dryer ERR option-state message
Virtual technician
Does ERR still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
AEG France — dryer ERR option-state message
AEG France · 2026 · official_doc
Was this entry useful?