- Appliances
- Dishwashers
I30
AEG dishwasher i30: anti-flood protection active
Risk level
High
Professional inspection is recommended.
Urgency
Immediate
Quick answer
i30 means the anti-flood system detected water in the base or a leak condition. Preserve the full display and model, then use whether water is visible at the tap, inlet connection, door edge or beneath the upright appliance to choose the next branch before any part or paid repair.
Safety first
Stop and check this first
- Stop immediately for water near electricity, smoke, burning smell, abnormal heat, damaged cable or repeated breaker trips. Close the water tap when a leak is possible; sealed water, heat and mains circuits are professional-only.
Safe checks you can perform
- Capture the decision evidence
- Run the one discriminating check
- Stop at the result boundary
Leave these tasks to a qualified professional
- Do not attempt this professional task: Evidence-led AEG handoff for i30
What a technician must be able to justify
A technician is coming
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Evidence-led AEG handoff for i30
What they doA qualified technician should test external connection, door seal, foam overflow, internal hose, sump or base-float activation, using the exact model/PNC and the recorded result for whether water is visible at the tap, inlet connection, door edge or beneath the upright appliance.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Checks and evidence, step by step
Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
- 1
Capture the decision evidence
No special tools
Procedure
Photograph i30, the complete message and model/PNC. Record the failed programme stage and whether water is visible at the tap, inlet connection, door edge or beneath the upright appliance. Do not clear the history repeatedly.
Stop immediately for water near electricity, smoke, burning smell, abnormal heat, damaged cable or repeated breaker trips. Close the water tap when a leak is possible; sealed water, heat and mains circuits are professional-only.
Evidence: AEG France — dishwasher i30 leak detection
- 2
Run the one discriminating check
No special tools
Procedure
Stop the programme, close the water tap and disconnect only if the plug area is dry. Keep the dishwasher upright; do not tilt it to clear the code or remove panels to dry the base.
Stop immediately for water near electricity, smoke, burning smell, abnormal heat, damaged cable or repeated breaker trips. Close the water tap when a leak is possible; sealed water, heat and mains circuits are professional-only.
Evidence: AEG France — dishwasher i30 leak detection
- 3
Stop at the result boundary
No special tools
Procedure
A wet external coupling belongs to installation repair. No visible external leak with continuous draining means water is probably contained in the base: leave it off for qualified leak tracing. Keep the appliance off; no owner restart is justified.
Stop immediately for water near electricity, smoke, burning smell, abnormal heat, damaged cable or repeated breaker trips. Close the water tap when a leak is possible; sealed water, heat and mains circuits are professional-only.
Evidence: AEG France — dishwasher i30 leak detection
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Appliances
- Brand
- AEG
- Product type
- Dishwashers
Known code variants
- 3 bips AEG
- AEG 30
- AEG dishwasher i30
- AEG Fehler i30
- AEG Geschirrspüler i30
- AEG i30
- AEG i30 error
- AEG lavavajillas i30
- antidesbordamiento Electrolux
- Electrolux anti-flood
- Electrolux dishwasher i30
- Electrolux i30
- error AEG i30
- error i30 lavavajillas Electrolux
- errore i30 lavastoviglie
- I30
- i30 AEG dishwasher
- i30 AEG Geschirrspüler
- i30 AEG lavavajillas
What it means
AEG's official French support documents i30 on the dishwasher as follows: the anti-flood system detected water in the base or a leak condition. The exact model manual controls compatibility; the same code on another appliance can mean something else.
Warnings and stop conditions
- Criticalsource verified
Stop immediately for water near electricity, smoke, burning smell, abnormal heat, damaged cable or repeated breaker trips. Close the water tap when a leak is possible; sealed water, heat and mains circuits are professional-only.
Evidence: AEG France — dishwasher i30 leak detection
Symptoms and causes
Probable causes · in order
- Official AEG meaningConfirmed
AEG's official French support documents i30 on the dishwasher as follows: the anti-flood system detected water in the base or a leak condition. The exact model manual controls compatibility; the same code on another appliance can mean something else.
Evidence: AEG France — dishwasher i30 leak detection
- What still has to be separatedPossible
external connection, door seal, foam overflow, internal hose, sump or base-float activation
Evidence: AEG France — dishwasher i30 leak detection
Virtual technician
Does I30 still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
AEG France — dishwasher i30 leak detection
AEG France · 2026 · official_doc
Was this entry useful?