Independent technical referenceOfficial site
  • Appliances
  • Ovens

S01

Samsung S-01 on oven: safety shutoff after long use

Verified with sources1 sourceReviewed Oct 3, 2026
Technician coming? See the 2 steps they must show you
Built-in electric oven with glass door
Matti BlumeCC BY-SA 4.0Image source

Risk level

Low

Usually safe to check without specialist tools.

Urgency

Low

Quick answer

Your Samsung oven shows S-01 because it ran at a set temperature for a long time and the safety shutoff triggered. Samsung says it is not a system failure: turn off the oven, remove the food and then use it normally again.

Safety first

Stop and check this first

  • After an S-01 shutoff the oven and food can be very hot. Use oven gloves to remove the tray and do not try to work around this safety shutoff.

Safe checks you can perform

  • Turn off and remove the food
  • Compare with Samsung's limits
  • Normal use again

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Check if S-01 appears too early
  • Do not attempt this professional task: Function test after the check

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Check if S-01 appears too early

    What they doSamsung service checks the oven control if the shutoff triggers in cooking much shorter than the published limits.

    They must show youthe shutoff reproduced before the limit.

    In writingthe check and any replaced part with its reference.

  2. Function test after the check

    What they doThe technician runs a normal cooking cycle after the repair.

    They must show youthe oven running without S-01 in a short cycle.

    In writingthe test result.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. Turn off and remove the food

    No special tools

    Who:
    you.
    How:
    turn off the oven and remove the food, as Samsung instructs. Use oven gloves: the cavity will be hot.
    Result that matters:
    the warning clearing when turned off.
    If it clears:
    it was the safety shutoff; you can use the oven normally again.
    If the oven will not turn off or the warning stays:
    cut the power for 30 seconds and contact Samsung if it persists.
    Evidence to keep:
    a note of how long and at what temperature it had been running.

    Evidence: Check out the information codes on my oven

  2. Compare with Samsung's limits

    No special tools

    Who:
    you.
    How:
    compare how long it had been on with Samsung's limits: 16 hours under 105 °C, 8 hours from 105 °C to 240 °C and 4 hours from 245 °C.
    Result that matters:
    confirming the shutoff matches the table.
    If it matches:
    that is the intended behavior and there is no fault.
    If it appeared well before those times:
    it does not fit Samsung's description; note it and contact its service centre.
    Evidence to keep:
    the start time and the time S-01 appeared.

    Evidence: Check out the information codes on my oven

  3. Normal use again

    No special tools

    Who:
    you.
    How:
    use the oven normally again, as Samsung instructs, and check that it heats and S-01 does not return in short cooking.
    Result that matters:
    confirming the oven works properly.
    If it works:
    nothing more is needed.
    If S-01 appears in short cooking:
    contact Samsung service with your notes.
    Evidence to keep:
    notes of duration and temperature if it repeats.

    Evidence: Check out the information codes on my oven

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Appliances
Brand
Samsung
Product type
Ovens

Known code variants

  • horno Samsung S-01
  • S-O1
  • S01
  • Samsung oven S-01
  • Samsung S-01

What it means

Samsung defines S-01 as a safety shutoff: the oven has continued operating at a set temperature for an extended period. Samsung's limits are 16 hours under 105 °C, 8 hours from 105 °C to 240 °C and 4 hours from 245 °C to maximum. Samsung states it is not a system failure but a planned protection. The code does not point to any faulty part.

Warnings and stop conditions

  • Loweditorial warning

    After an S-01 shutoff the oven and food can be very hot. Use oven gloves to remove the tray and do not try to work around this safety shutoff.

    Evidence: Check out the information codes on my oven

Symptoms and causes

Probable causes · in order

  • Very long cooking at a fixed temperatureConfirmed

    A long programme exceeded the maximum time for its temperature range in Samsung's table.

    Evidence: Check out the information codes on my oven

  • Oven left on by mistakePossible

    Nobody was cooking and the oven stayed on until it reached the safety limit.

    Evidence: Check out the information codes on my oven

Virtual technician

Does S01 still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Sources and technical references

  1. 1

    Check out the information codes on my oven

    Samsung · 2026 · official_doc

Sources: Check out the information codes on my ovenreviewed 2026-10-03 · verified

Was this entry useful?