ErrorBase
Independent technical referenceOfficial site
  • Appliances
  • Washing machines

E30

Teka E30 on a washing machine: the door does not lock

Verified with sources3 sourcesReviewed Oct 4, 2026
Technician coming? See the 2 steps they must show you
Front-loading washing machine
Dany kgPublic domainImage source

Risk level

Low

Usually safe to check without specialist tools.

Urgency

Medium

Quick answer

On Teka washing machines in the TKD range, E30 means the door does not lock. Teka gives a door not properly closed or a damaged door lock as causes: close the door firmly and restart the programme; if E30 stays, call the Official Technical Service.

Safety first

Stop and check this first

  • Do not force the door or take the lock apart: it is connected to mains voltage. That check is for the Teka Official Technical Service.

Safe checks you can perform

  • Close the door properly
  • Power and programme restart
  • Confirm your washer is a TKD model

Leave these tasks to a qualified professional

  • Do not attempt this professional task: Test wash after the repair
  • Do not attempt this professional task: Checking the door lock

What a technician must be able to justify

Technician visit

These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.

These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.

  1. Test wash after the repair

    What they doWhen finished, the technician runs a programme and checks that the door locks and the wash starts without E30 returning.

    They must show youa programme starting with the door locked and no E30.

    In writingthe test done, the result and the date.

  2. Checking the door lock

    What they doThe technician checks the door lock and reads the stored error list in the service menu, where the washer keeps the last 10 errors recorded.

    They must show youthe result of the lock check and the errors the washer had stored.

    In writingthe cause found, the part replaced if any with its reference and the reason.

Before accepting a part or repair

Nothing has been shown yet. Do not accept a part swap based on the code alone.

Follow these steps

Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.

  1. Close the door properly

    No special tools

    Who:
    you, without opening anything.
    How:
    open the door, check that no laundry is caught between the door and the seal, and close it firmly. Teka asks you to check that the door is properly closed before calling the technical service.
    Result that matters:
    the door fully closed before the programme starts.
    If the door was not properly closed:
    close it and restart the programme.
    If it was properly closed and E30 returns:
    check the power and restart.
    Evidence to keep:
    photo of the display showing E30 and of the closed door.

    Evidence: Teka Service Manual MSWM15043 EN SPA washing machines (TKD) · Teka España soporte: La lavadora no se conecta y no funciona. ¿Qué puedo hacer?

  2. Power and programme restart

    No special tools

    Who:
    you.
    How:
    check that the plug is properly in, that the circuit breaker has not tripped, that there is no power cut and that you pressed the start button, as Teka Spain asks. Then restart the programme once.
    Result that matters:
    ruling out a power problem before suspecting the lock.
    If the wash starts without E30:
    it was a one off fault; watch the next washes.
    If E30 returns with the door properly closed:
    contact the Teka Official Technical Service.
    Evidence to keep:
    note of how many times E30 appeared and on which programme.

    Evidence: Teka España soporte: La lavadora no se conecta y no funciona. ¿Qué puedo hacer?

  3. Confirm your washer is a TKD model

    No special tools

    Who:
    you.
    How:
    look at the rating plate of the washer and find the model. The code table in this manual is for the SPA range: TKD 1270, 1280, 1480, 1490 and TKD 1610 WD.
    Result that matters:
    knowing whether this meaning of E30 applies to your washer.
    If it is a TKD model:
    give the technician the model and the E30 code.
    If it is another model:
    the meaning may differ; check the manual for your model or ask the service.
    Evidence to keep:
    photo of the rating plate with the model and serial number.

    Evidence: Teka Service Manual MSWM15043 EN SPA washing machines (TKD)

Still not solved

If the error persists, stop here. See what the technician must do and show you.

Where this code applies

A code is meaningful only inside the right product and version context.

Primary scope

System
Appliances
Brand
Teka
Product type
Washing machines

Known code variants

  • E 30
  • E-30
  • E30
  • error E30 lavadora Teka
  • lavadora Teka no arranca puerta E30
  • lavadora Teka puerta no bloquea
  • Teka lavadora E30
  • Teka TKD E30
  • Teka washer door does not lock
  • Teka washer door not closed E30
  • Teka washer error E30
  • Teka washing machine E30

What it means

Teka's service manual MSWM15043 for the SPA washing machine range (TKD 1270, 1280, 1480, 1490 and the TKD 1610 WD washer dryer) defines E30 as door does not lock and gives two causes: the door not closed and a damaged door lock. You can check the first yourself, and Teka Spain also asks you to check that the door is properly closed when the washer does not work. The technician checks the lock. Codes differ in other Teka ranges. The code alone never proves a part is faulty.

Warnings and stop conditions

  • Mediumeditorial warning

    Do not force the door or take the lock apart: it is connected to mains voltage. That check is for the Teka Official Technical Service.

    Evidence: Teka Service Manual MSWM15043 EN SPA washing machines (TKD)

Symptoms and causes

Probable causes · in order

  • Door not properly closedCommon

    It is the first cause Teka gives for E30: if the door is not fully closed, the washer cannot lock it and the wash does not start.

    Evidence: Teka Service Manual MSWM15043 EN SPA washing machines (TKD) · Teka España soporte: La lavadora no se conecta y no funciona. ¿Qué puedo hacer?

  • Damaged door lockPossible

    If the door is properly closed and E30 returns, the service manual points to the door lock, which the technician checks and replaces.

    Evidence: Teka Service Manual MSWM15043 EN SPA washing machines (TKD)

Virtual technician

Does E30 still appear after these checks?

Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.

Start diagnosis

Sources and technical references

  1. 1

    Teka Manual de Servicio MSWM15043 ES gama lavadoras SPA (TKD)

    Teka · 2020 · manual

  2. 2

    Teka Service Manual MSWM15043 EN SPA washing machines (TKD)

    Teka · 2020 · manual

  3. 3

    Teka España soporte: La lavadora no se conecta y no funciona. ¿Qué puedo hacer?

    Teka · 2026 · official_doc

Sources: Teka Manual de Servicio MSWM15043 ES gama lavadoras SPA (TKD) · Teka Service Manual MSWM15043 EN SPA washing machines (TKD) · Teka España soporte: La lavadora no se conecta y no funciona. ¿Qué puedo hacer?reviewed 2026-10-04 · verified

Was this entry useful?