- Electric mobility
- Electric bicycle
113111
Bosch eBike 113111: Your control unit has a memory error.
Risk level
High
Professional inspection is recommended.
Urgency
Immediate
Quick answer
Your control unit has a memory error. The functionality of the control unit may be impaired by this. For 113111, Bosch's user step is: Restart your eBike. If the problem persists, please contact your specialist dealer. If the same code returns, preserve the display and stop repeating resets.
Safety first
Stop and check this first
- Do not open powered components or bypass sensors. Stop riding if assistance, braking, lighting or controls behave unpredictably, or if there is heat, smell, damage or moisture.
Safe checks you can perform
- Preserve the code before changing anything
- Apply only Bosch's published user step
- Use recurrence as the stop point
Leave these tasks to a qualified professional
- Do not attempt this professional task: Measured handoff for 113111
What a technician must be able to justify
A technician is coming
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Measured handoff for 113111
What they doUse the saved timing, system generation and Bosch diagnostics to test Control unit in the state that produced 113111; verify software, connectors and component values before replacement.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Checks and evidence, step by step
Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
- 1
Preserve the code before changing anything
No special tools
Procedure
Photograph 113111. Record the eBike model, Bosch system generation if known, battery level, Control unit, what stopped working and when the code appeared.
Do not open powered components or bypass sensors. Stop riding if assistance, braking, lighting or controls behave unpredictably, or if there is heat, smell, damage or moisture.
Evidence: Bosch eBike Systems — official fault code 113111
- 2
Apply only Bosch's published user step
No special tools
Procedure
Restart your eBike. If the problem persists, please contact your specialist dealer. Record whether the condition “Your control unit has a memory error.” disappears and whether 113111 reappears after the exact published step. Do not add an undocumented reset or open a component.
Do not open powered components or bypass sensors. Stop riding if assistance, braking, lighting or controls behave unpredictably, or if there is heat, smell, damage or moisture.
Evidence: Bosch eBike Systems — official fault code 113111
- 3
Use recurrence as the stop point
No special tools
Procedure
If 113111 remains absent, monitor the same function; that does not prove a repair. If “Your control unit has a memory error.” or 113111 returns, stop the user checks and book a Bosch eBike specialist.
Do not open powered components or bypass sensors. Stop riding if assistance, braking, lighting or controls behave unpredictably, or if there is heat, smell, damage or moisture.
Evidence: Bosch eBike Systems — official fault code 113111
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Electric mobility
- Brand
- Bosch eBike Systems
- Product type
- Electric bicycle
Known code variants
- Bosch 113111 bici elettrica
- Bosch 113111 bicicleta eléctrica
- Bosch 113111 E-Bike
- Bosch 113111 eBike
- Bosch 113111 vélo électrique
- Bosch eBike code 113111
- Bosch eBike error 113111
- Bosch eBike Fehler 113111
- Bosch eBike Fehlercode 113111
- code Bosch eBike 113111
- codice Bosch eBike 113111
- código Bosch eBike 113111
- erreur Bosch eBike 113111
- error Bosch eBike 113111
- errore Bosch eBike 113111
What it means
Bosch eBike Systems assigns 113111 to Control unit with source severity CRITICAL_ERROR. It reports the detected state, not proof that one particular part has failed. The functionality of the control unit may be impaired by this.
Warnings and stop conditions
- Highsource verified
Do not open powered components or bypass sensors. Stop riding if assistance, braking, lighting or controls behave unpredictably, or if there is heat, smell, damage or moisture.
Evidence: Bosch eBike Systems — official fault code 113111
Symptoms and causes
Probable causes · in order
- What the code establishesConfirmed
Bosch identifies 113111 at Control unit: Your control unit has a memory error. Keep that meaning scoped to a Bosch eBike system and the exact code shown.
Evidence: Bosch eBike Systems — official fault code 113111
- What the official step decidesPossible
If “Your control unit has a memory error.” clears after Bosch's exact step, only the current condition has cleared; no failed part has been proved. If 113111 returns, the documented user branch is exhausted and the recurrence becomes the evidence for service.
Evidence: Bosch eBike Systems — official fault code 113111
Virtual technician
Does 113111 still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
Bosch eBike Systems — official fault code 113111
Bosch eBike Systems · 2026 · official_doc
Was this entry useful?