- Electric mobility
- Electric bicycle
153001
Bosch eBike 153001: The temperature of your control unit is too high.
Risk level
High
Professional inspection is recommended.
Urgency
Immediate
Quick answer
The temperature of your control unit is too high. This may mean that no motor support is available to you, and your eBike switches off. For 153001, Bosch's user step is: Let your eBike cool down for 15 minutes in a cooler environment. Avoid direct sunlight here. Then restart your eBike. If the problem persists, please contact your specialist dealer. If the same code returns, preserve the display and stop repeating resets.
Safety first
Stop and check this first
- Stop riding or charging while a battery, drive unit, cable or connector is abnormally hot. Keep it away from combustible material; smoke, swelling, hissing or burning smell requires emergency help.
Safe checks you can perform
- Preserve the code before changing anything
- Apply only Bosch's published user step
- Use recurrence as the stop point
Leave these tasks to a qualified professional
- Do not attempt this professional task: Measured handoff for 153001
What a technician must be able to justify
A technician is coming
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Measured handoff for 153001
What they doUse the saved timing, system generation and Bosch diagnostics to test Control unit in the state that produced 153001; verify software, connectors and component values before replacement.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Checks and evidence, step by step
Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
- 1
Preserve the code before changing anything
No special tools
Procedure
Photograph 153001. Record the eBike model, Bosch system generation if known, battery level, Control unit, what stopped working and when the code appeared.
Stop riding or charging while a battery, drive unit, cable or connector is abnormally hot. Keep it away from combustible material; smoke, swelling, hissing or burning smell requires emergency help.
Evidence: Bosch eBike Systems — official fault code 153001
- 2
Apply only Bosch's published user step
No special tools
Procedure
Let your eBike cool down for 15 minutes in a cooler environment. Avoid direct sunlight here. Then restart your eBike. If the problem persists, please contact your specialist dealer. Record whether the condition “The temperature of your control unit is too high.” disappears and whether 153001 reappears after the exact published step. Do not add an undocumented reset or open a component.
Stop riding or charging while a battery, drive unit, cable or connector is abnormally hot. Keep it away from combustible material; smoke, swelling, hissing or burning smell requires emergency help.
Evidence: Bosch eBike Systems — official fault code 153001
- 3
Use recurrence as the stop point
No special tools
Procedure
If 153001 remains absent, monitor the same function; that does not prove a repair. If “The temperature of your control unit is too high.” or 153001 returns, stop the user checks and book a Bosch eBike specialist.
Stop riding or charging while a battery, drive unit, cable or connector is abnormally hot. Keep it away from combustible material; smoke, swelling, hissing or burning smell requires emergency help.
Evidence: Bosch eBike Systems — official fault code 153001
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Electric mobility
- Brand
- Bosch eBike Systems
- Product type
- Electric bicycle
Known code variants
- Bosch 153001 bici elettrica
- Bosch 153001 bicicleta eléctrica
- Bosch 153001 E-Bike
- Bosch 153001 eBike
- Bosch 153001 vélo électrique
- Bosch eBike code 153001
- Bosch eBike error 153001
- Bosch eBike Fehler 153001
- Bosch eBike Fehlercode 153001
- code Bosch eBike 153001
- codice Bosch eBike 153001
- código Bosch eBike 153001
- erreur Bosch eBike 153001
- error Bosch eBike 153001
- errore Bosch eBike 153001
What it means
Bosch eBike Systems assigns 153001 to Control unit with source severity ERROR. It reports the detected state, not proof that one particular part has failed. This may mean that no motor support is available to you, and your eBike switches off.
Warnings and stop conditions
- Highsource verified
Stop riding or charging while a battery, drive unit, cable or connector is abnormally hot. Keep it away from combustible material; smoke, swelling, hissing or burning smell requires emergency help.
Evidence: Bosch eBike Systems — official fault code 153001
Symptoms and causes
Probable causes · in order
- What the code establishesConfirmed
Bosch identifies 153001 at Control unit: The temperature of your control unit is too high. Keep that meaning scoped to a Bosch eBike system and the exact code shown.
Evidence: Bosch eBike Systems — official fault code 153001
- What the official step decidesPossible
If “The temperature of your control unit is too high.” clears after Bosch's exact step, only the current condition has cleared; no failed part has been proved. If 153001 returns, the documented user branch is exhausted and the recurrence becomes the evidence for service.
Evidence: Bosch eBike Systems — official fault code 153001
Virtual technician
Does 153001 still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
Bosch eBike Systems — official fault code 153001
Bosch eBike Systems · 2026 · official_doc
Was this entry useful?