- Electric mobility
- Electric bicycle
1C8060
Bosch eBike 1C8060: Your control unit is not compatible with your ABS.
Risk level
High
Professional inspection is recommended.
Urgency
High
Quick answer
Your control unit is not compatible with your ABS. This is why your ABS is not working properly. For 1C8060, Bosch's user step is: Perform a software update in the eBike Flow app. Then restart your eBike. If the problem persists, please contact your specialist dealer. If the same code returns, preserve the display and stop repeating resets.
Safety first
Stop and check this first
- Assume ABS may be unavailable. Ride only if normal mechanical braking is confirmed and conditions are safe; otherwise do not continue and arrange transport to a specialist.
Safe checks you can perform
- Preserve the code before changing anything
- Apply only Bosch's published user step
- Use recurrence as the stop point
Leave these tasks to a qualified professional
- Do not attempt this professional task: Measured handoff for 1C8060
What a technician must be able to justify
A technician is coming
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Measured handoff for 1C8060
What they doUse the saved timing, system generation and Bosch diagnostics to test ABS in the state that produced 1C8060; verify software, connectors and component values before replacement.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Checks and evidence, step by step
Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
- 1
Preserve the code before changing anything
No special tools
Procedure
Photograph 1C8060. Record the eBike model, Bosch system generation if known, battery level, ABS, what stopped working and when the code appeared.
Assume ABS may be unavailable. Ride only if normal mechanical braking is confirmed and conditions are safe; otherwise do not continue and arrange transport to a specialist.
Evidence: Bosch eBike Systems — official fault code 1C8060
- 2
Apply only Bosch's published user step
No special tools
Procedure
Perform a software update in the eBike Flow app. Then restart your eBike. If the problem persists, please contact your specialist dealer. Record whether the condition “Your control unit is not compatible with your ABS.” disappears and whether 1C8060 reappears after the exact published step. Do not add an undocumented reset or open a component.
Assume ABS may be unavailable. Ride only if normal mechanical braking is confirmed and conditions are safe; otherwise do not continue and arrange transport to a specialist.
Evidence: Bosch eBike Systems — official fault code 1C8060
- 3
Use recurrence as the stop point
No special tools
Procedure
If 1C8060 remains absent, monitor the same function; that does not prove a repair. If “Your control unit is not compatible with your ABS.” or 1C8060 returns, stop the user checks and book a Bosch eBike specialist.
Assume ABS may be unavailable. Ride only if normal mechanical braking is confirmed and conditions are safe; otherwise do not continue and arrange transport to a specialist.
Evidence: Bosch eBike Systems — official fault code 1C8060
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Electric mobility
- Brand
- Bosch eBike Systems
- Product type
- Electric bicycle
Known code variants
- Bosch 1C8060 bici elettrica
- Bosch 1C8060 bicicleta eléctrica
- Bosch 1C8060 E-Bike
- Bosch 1C8060 eBike
- Bosch 1C8060 vélo électrique
- Bosch eBike code 1C8060
- Bosch eBike error 1C8060
- Bosch eBike Fehler 1C8060
- Bosch eBike Fehlercode 1C8060
- code Bosch eBike 1C8060
- codice Bosch eBike 1C8060
- código Bosch eBike 1C8060
- erreur Bosch eBike 1C8060
- error Bosch eBike 1C8060
- errore Bosch eBike 1C8060
What it means
Bosch eBike Systems assigns 1C8060 to ABS with source severity ERROR. It reports the detected state, not proof that one particular part has failed. This is why your ABS is not working properly.
Warnings and stop conditions
- Highsource verified
Assume ABS may be unavailable. Ride only if normal mechanical braking is confirmed and conditions are safe; otherwise do not continue and arrange transport to a specialist.
Evidence: Bosch eBike Systems — official fault code 1C8060
Symptoms and causes
Probable causes · in order
- What the code establishesConfirmed
Bosch identifies 1C8060 at ABS: Your control unit is not compatible with your ABS. Keep that meaning scoped to a Bosch eBike system and the exact code shown.
Evidence: Bosch eBike Systems — official fault code 1C8060
- What the official step decidesPossible
If “Your control unit is not compatible with your ABS.” clears after Bosch's exact step, only the current condition has cleared; no failed part has been proved. If 1C8060 returns, the documented user branch is exhausted and the recurrence becomes the evidence for service.
Evidence: Bosch eBike Systems — official fault code 1C8060
Virtual technician
Does 1C8060 still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
Bosch eBike Systems — official fault code 1C8060
Bosch eBike Systems · 2026 · official_doc
Was this entry useful?