- Appliances
- Washing machines
PE
Samsung PE on a washer: clutch position not detected
Risk level
Medium
Proceed carefully and stop if the check is unclear.
Urgency
Medium
Quick answer
On a Samsung washer, PE or PC means the clutch position is not detected; PE1 or PC1 means it is detected but the Hall sensor signal is failing. Samsung gives no home steps: contact its service centre.
Safety first
Stop and check this first
- Samsung offers no resets for PE or PC: it says to contact its service centre. Clutch, motor and sensor are inside the machine and are not a home job.
Safe checks you can perform
- Exact code variant
- Washer condition when it stopped
- Book service with the details
Leave these tasks to a qualified professional
- Do not attempt this professional task: Clutch and Hall sensor diagnosis
- Do not attempt this professional task: Full wash and spin test
What a technician must be able to justify
Technician visit
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Clutch and Hall sensor diagnosis
What they doThe technician checks the clutch movement and measures the Hall sensor signal with diagnostic equipment, following Samsung's procedure.
They must show youthe measured sensor signal and the clutch movement.
In writingwhich part fails, its part number and the reason for replacing it.
Full wash and spin test
What they doAfter the repair, they run a programme with wash and spin to check the clutch changes position without a code.
They must show youthe full cycle finished without PE or PC.
In writingthe test carried out and its result.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Exact code variant
- Who:
- you, no tools.
- How:
- check whether the display shows PE, PC, PE1 or PC1 and at what stage it stopped (wash or spin).
- Result that matters:
- whether there is a number after the code.
- If PE or PC with no number:
- Samsung says the clutch position is not detected.
- If PE1 or PC1:
- the clutch is detected and the Hall signal fails; tell service exactly that.
- Evidence to keep:
- photo of the display and a note of the stage.
Evidence: What do the codes on my washing machine mean?
Washer condition when it stopped
- Who:
- you, looking without forcing anything.
- How:
- check whether water or laundry is left inside and whether the lid or door is still locked. Do not force it or rerun programmes to clear the code.
- Result that matters:
- whether there is trapped water the technician should know about.
- If water is left:
- mention it when booking; do not dismantle anything to drain it.
- If it is empty:
- note it; it makes the visit easier.
- Evidence to keep:
- photo of the inside if the door opens.
Evidence: What do the codes on my washing machine mean?
Book service with the details
- Who:
- you.
- How:
- contact Samsung service, as the table says, with the model, serial number and exact code.
- Result that matters:
- a visit that arrives knowing whether it is a position or a signal problem.
- If you get an appointment:
- keep the reference number.
- If they ask you to reset it:
- note that you did and whether the code returned.
- Evidence to keep:
- service reference and date.
Evidence: What do the codes on my washing machine mean?
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Appliances
- Brand
- Samsung
- Product type
- Washing machines
Known code variants
- code erreur PE lave-linge LG
- codice PE LG
- código PE LG
- erreur PE LG
- error PE lavadora LG
- error PE lavavajillas LG
- errore PE lavatrice LG
- Fehlercode PE LG
- lavadora Samsung error PC
- lavavajillas Samsung error PE
- LG dishwasher PE
- LG dishwasher water level sensor PE
- LG PE
- LG PE dishwasher code
- LG PE lavavajillas
- LG Waschmaschine Fehler PE
- LG washer code PE
- P E
- PC
- PC1
- PE error LG washer
- PE1
- Samsung dishwasher error PE
- Samsung dishwasher PE
- Samsung lavadora PE
- Samsung lavavajillas PE
- Samsung PE clutch
- Samsung PE embrague
- Samsung PE half load
- Samsung PE media carga
- Samsung washer PE
- Samsung washing machine PC
- sensor nivel agua lavavajillas LG
What it means
Samsung UK defines PC and PE as clutch position not detected, and PC1 and PE1 as clutch detected with a Hall signal malfunction, the magnetic sensor that reports that position. The clutch switches the drive between wash and spin, and the board needs to know where it is before turning the drum. The code does not say whether the mechanism, the sensor or its wiring is at fault, and Samsung sends it straight to service, without resets.
Warnings and stop conditions
- Mediumsource verified
Samsung offers no resets for PE or PC: it says to contact its service centre. Clutch, motor and sensor are inside the machine and are not a home job.
Evidence: What do the codes on my washing machine mean?
Symptoms and causes
Probable causes · in order
- Clutch not reaching its positionPossible
This is what PC or PE describes: the board does not see the clutch where it should be. It differs from PE1 in that there is no detection at all.
Evidence: What do the codes on my washing machine mean?
- Hall sensor signal faultPossible
This is the definition of PC1 and PE1: the clutch is detected but the sensor signal fails. Points to the sensor or its connection more than the mechanism.
Evidence: What do the codes on my washing machine mean?
Virtual technician
Does PE still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
What do the codes on my washing machine mean?
Samsung · 2026 · official_doc
Was this entry useful?