- Printers
- Inkjet printer
1300
Canon PIXMA TS8300 code 1300: paper is jammed while feeding from the rear tray
Evidence linked to this decision
View source: Canon PIXMA TS8300 support code 1300Risk level
Medium
Proceed carefully and stop if the check is unclear.
Urgency
Medium
Quick answer
1300 means paper is jammed while feeding from the rear tray. Match the exact TS8300-series model, stop the job and follow Canon's documented branch once.
Safety first
Safe checks you can perform
- Preserve the exact failure branch
- Clear the visible rear-path jam
Leave these tasks to a qualified professional
- Do not attempt this professional task: Measured Canon service handoff for 1300
What a technician must be able to justify
A technician is coming
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Measured Canon service handoff for 1300
What they doProvide the exact model, serial number, 1300 message, job stage and the result of “Clear the visible rear-path jam”. Ask the technician to reproduce the branch “paper is jammed while feeding from the rear tray” against the exact service information and record the failed observation or measurement before quoting a part.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Preserve the exact failure branch
Photograph 1300, the full touch-screen message and the exact TS8300 model. Note the paper source, active job and whether the code appeared before movement, during feed or after printing. The code narrows the branch to “paper is jammed while feeding from the rear tray”; it does not identify a replacement part.
Evidence: Canon PIXMA TS8300 support code 1300
Clear the visible rear-path jam
Tap Stop before powering off if needed. With both hands, pull visible paper slowly from the output slot or rear tray without tearing it. If it will not move, do not force it; use Canon's inside/rear procedure. Reload suitable paper and select OK. If 1300 returns after this attempt, stop and use the official Canon reference below. Do not repeat the procedure.
Evidence: Canon PIXMA TS8300 support code 1300
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Virtual technician
Does 1300 still appear after these checks?
This guided flow uses the exact code and your answers to choose a test, an expected result and the next branch.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Printers
- Brand
- Canon
- Product type
- Inkjet printer
Known code variants
- Canon 1300
- Canon TS8300 1300
- code support PIXMA 1300
- codice supporto PIXMA 1300
- código asistencia PIXMA 1300
- PIXMA support code 1300
- PIXMA Supportcode 1300
What it means
Canon's official TS8300-series manual says support code 1300 means paper is jammed while feeding from the rear tray. This applies to the documented TS8320, TS8340, TS8350/51/52, TS8360, TS8370 and TS8390/91/92 family, not every Canon printer.
Symptoms and causes
Probable causes · in order
- What usually triggers this codeCommon
Curled, unsuitable or unevenly loaded paper can skew in the rear feed path.
Evidence: Canon PIXMA TS8300 support code 1300
- 1300 persists after the documented actionPossible
If 1300 returns once the visible condition has been corrected, the safe external branch is exhausted. The recurrence proves only that the documented action did not resolve this branch; the display alone cannot select or confirm an internal component.
Evidence: Canon PIXMA TS8300 support code 1300
Sources and technical references
- 1
Canon PIXMA TS8300 support code 1300
Canon PIXMA Manuals · 2019 · official_doc
Was this entry useful?