- Printers
- Inkjet printer
1730
Canon PIXMA TS8300 code 1730: the tank may be exhausted of genuine Canon ink or may be counterfeit
Evidence linked to this decision
View source: Canon PIXMA TS8300 support code 1730Risk level
Medium
Proceed carefully and stop if the check is unclear.
Urgency
Medium
Quick answer
1730 means the tank may be exhausted of genuine Canon ink or may be counterfeit. Match the exact TS8300-series model, stop the job and follow Canon's documented branch once.
Safety first
Safe checks you can perform
- Preserve the exact failure branch
- Verify the tank and provenance without accusing from the code
Leave these tasks to a qualified professional
- Do not attempt this professional task: Measured Canon service handoff for 1730
What a technician must be able to justify
Technician visit
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Measured Canon service handoff for 1730
What they doProvide the exact model, serial number, 1730 message, job stage and the result of “Verify the tank and provenance without accusing from the code”. Ask the technician to reproduce the branch “the tank may be exhausted of genuine Canon ink or may be counterfeit” against the exact service information and record the failed observation or measurement before quoting a part.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Preserve the exact failure branch
Photograph 1730, the full touch-screen message and the exact TS8300 model. Note the paper source, active job and whether the code appeared before movement, during feed or after printing. The code narrows the branch to “the tank may be exhausted of genuine Canon ink or may be counterfeit”; it does not identify a replacement part.
Evidence: Canon PIXMA TS8300 support code 1730
Verify the tank and provenance without accusing from the code
Identify the displayed tank, exact designation, packaging and purchase record. Replacement with the correct verified tank preserves level detection. Canon also documents a five-second Stop override, but it disables monitoring and shifts damage risk to the user; do not present that as the default fix. Use Canon's reporting route only with actual provenance evidence.
Evidence: Canon PIXMA TS8300 support code 1730
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Virtual technician
Does 1730 still appear after these checks?
This guided flow uses the exact code and your answers to choose a test, an expected result and the next branch.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Printers
- Brand
- Canon
- Product type
- Inkjet printer
Known code variants
- Canon 1730
- Canon TS8300 1730
- code support PIXMA 1730
- codice supporto PIXMA 1730
- código asistencia PIXMA 1730
- PIXMA support code 1730
- PIXMA Supportcode 1730
What it means
Canon's official TS8300-series manual says support code 1730 means the tank may be exhausted of genuine Canon ink or may be counterfeit. This applies to the documented TS8320, TS8340, TS8350/51/52, TS8360, TS8370 and TS8390/91/92 family, not every Canon printer.
Symptoms and causes
Probable causes · in order
- What usually triggers this codeCommon
Canon's branch says the tank may have exhausted genuine Canon ink or may be counterfeit; the code alone cannot establish where it was bought or prove seller intent.
Evidence: Canon PIXMA TS8300 support code 1730
- 1730 persists after the documented actionPossible
If 1730 returns once the visible condition has been corrected, the safe external branch is exhausted. The recurrence proves only that the documented action did not resolve this branch; the display alone cannot select or confirm an internal component.
Evidence: Canon PIXMA TS8300 support code 1730
Sources and technical references
- 1
Canon PIXMA TS8300 support code 1730
Canon PIXMA Manuals · 2019 · official_doc
Was this entry useful?