- Printers
- Laser printer
07-530
Xerox printer fault code 07-530: manual feed slot paper jam
Risk level
Low
Usually safe to check without specialist tools.
Urgency
Medium
Quick answer
Fault code 07-530 on a Xerox multifunction printer indicates a paper jam in the bypass tray (manual feed slot). Gently pull the jammed sheet out of the front manual feed slot, close the slot cover, open and close the front cover to clear the fault, and load only 1 sheet at a time.
Safety first
Stop and check this first
- Load only 1 sheet at a time in the manual feed slot, and never use tools or sharp instruments to remove jammed media.
- When opening the front cover or printing with the rear cover open to prevent curl over 20 mm (0.8 in.), use caution because the fuser area inside becomes very hot.
Safe checks you can perform
- Pull the jammed sheet out of the manual feed slot and close the slot cover
- Open and close the printer front cover to reset fault code 07-530
- Flatten curl, load 1 sheet at a time, and adjust the manual slot width guides
- Select Manual Feed Slot and matching media settings in the print driver
Leave these tasks to a qualified professional
- Do not attempt this professional task: Inspect the manual feed slot pickup roller and entry sensor actuator
- Do not attempt this professional task: Professional removal of torn labels or debris inside the manual feed path
What a technician must be able to justify
Technician visit
These are the steps they must carry out and show you. Tick them as they work: if steps are skipped, do not accept a part swap.
These are not instructions for opening or handling the equipment yourself. They are the checks that should support a technical conclusion.
Inspect the manual feed slot pickup roller and entry sensor actuator
What they doIf fault code 07-530 appears repeatedly when feeding 1 supported sheet into the manual slot, a technician must inspect the bypass feed roller and entry sensor flag.
They must show youthe condition of the manual feed roller and sensor, plus a successful single-sheet print from the manual feed slot.
In writingthe 07-530 diagnosis, any roller or sensor servicing performed, and the test result.
Professional removal of torn labels or debris inside the manual feed path
What they doWhen label adhesive, envelope scraps, or heavy cardstock fragments lodge between the manual feed slot and internal registration rollers, official Xerox service must clear the path safely.
They must show youthe removed obstruction and a clean test print through the manual feed slot.
In writingthe cleaning or repair completed on the manual feed path and safety verification.
Before accepting a part or repair
Nothing has been shown yet. Do not accept a part swap based on the code alone.
Follow these steps
Note: Follow the documented order. An error code identifies the affected system, but it does not prove by itself which part has failed.
Pull the jammed sheet out of the manual feed slot and close the slot cover
- Who:
- you.
- How:
- grasp the misfed sheet or envelope sticking out of the front manual feed slot, pull it gently straight out so it does not tear, and then close the manual feed slot cover.
- Result that matters:
- clearing the single-sheet manual feed slot on the front of the printer.
- If the sheet comes out intact without tearing:
- proceed to open and close the front cover to reset the fault.
- If the sheet has advanced too far inside to grip from the slot:
- do not use tools; open the front cover and pull the toner cartridge out to reach it.
- Evidence to keep:
- photo of fault code 07-530 and the media type being fed.
Evidence: Xerox B215 Multifunction Printer User Guide - Paper Jams · Xerox B215 - Fault Code Information · Xerox B215 - Fault Code 07-530: Jam in the Bypass Tray Message (Manual Feed Slot) · Xerox B215 - Paper Jam in the Manual Feed Slot
Open and close the printer front cover to reset fault code 07-530
- Who:
- you.
- How:
- open the Xerox B215 front cover while keeping hands away from hot internal areas, verify no torn paper remains in the feed path, and close the front cover firmly.
- Result that matters:
- resetting the jam sensor after clearing the manual feed slot.
- If fault code 07-530 clears when the front cover closes:
- the printer is ready to resume printing.
- If fault code 07-530 stays on the panel after closing the front cover:
- remove the toner cartridge and check underneath for any hidden scrap.
- Evidence to keep:
- display confirmation that fault code 07-530 cleared.
Evidence: Xerox B215 Multifunction Printer User Guide - Paper Jams · Xerox B215 - Fault Code Information · Xerox B215 - Fault Code 07-530: Jam in the Bypass Tray Message (Manual Feed Slot) · Xerox B215 - Paper Jam in the Manual Feed Slot
Flatten curl, load 1 sheet at a time, and adjust the manual slot width guides
- Who:
- you.
- How:
- confirm your stock is between 76 x 127 mm and 216 x 356 mm (3.0 x 5.0 in. to 8.5 x 14 in.) and 60 to 220 g/m2 (16 to 58 lb), flatten any curl on envelopes, insert only 1 sheet print-side up in the center of the manual slot until the printer grips it, and slide the width guides against both edges without buckling the sheet.
- Result that matters:
- feeding a single flat sheet squarely into the manual feed slot.
- If the single sheet sits straight between the width guides:
- hold it gently until the printer pulls it in.
- If single-sided output curls more than 20 mm (0.8 in.) or envelopes wrinkle:
- open the rear cover to use the straight paper path.
- Evidence to keep:
- dimensions and weight of the specialty media or envelope.
Evidence: Xerox B215 Multifunction Printer User Guide - Paper Jams · Xerox B215 - Fault Code Information · Xerox B215 - Fault Code 07-530: Jam in the Bypass Tray Message (Manual Feed Slot) · Xerox B215 - Paper Jam in the Manual Feed Slot
Select Manual Feed Slot and matching media settings in the print driver
- Who:
- you.
- How:
- set Paper Source to Manual Feed Slot in your computer print driver along with the exact size and media type (such as Envelope, CardStock, or Labels), then press OK on the printer control panel when prompted.
- Result that matters:
- matching printer feed speed and fuser behavior to the single sheet in the manual slot.
- If the sheet feeds and prints cleanly:
- the issue was loading or driver configuration.
- If fault code 07-530 repeats with 1 flat plain sheet and matching settings:
- have official Xerox support inspect the manual feed slot.
- Evidence to keep:
- screenshot of print driver paper source and media type settings.
Evidence: Xerox B215 Multifunction Printer User Guide - Paper Jams · Xerox B215 - Fault Code Information · Xerox B215 - Fault Code 07-530: Jam in the Bypass Tray Message (Manual Feed Slot) · Xerox B215 - Paper Jam in the Manual Feed Slot
Still not solved
If the error persists, stop here. See what the technician must do and show you.
Where this code applies
A code is meaningful only inside the right product and version context.
Primary scope
- System
- Printers
- Brand
- Xerox
- Product type
- Laser printer
Known code variants
- 07-530
- Atasco en la bandeja especial
- Atasco en la ranura de alimentación manual
- Código de error 07-530
- Fault Code 07-530
- Jam in the Bypass Tray
- Jam in the Manual Feed Slot
What it means
In official Xerox Support articles and the Xerox B215 Multifunction Printer User Guide, fault prefixes 07 and 08 cover Tray 1 and the Manual Feed Slot, with fault code 07-530 specifically indicating the Jam in the Bypass Tray (Manual Feed Slot) message. It triggers when single-sheet media fed through the front manual slot misfed or stalled at the feed roller. Other Xerox models may differ, and this fault code alone never proves a hardware part is defective.
Warnings and stop conditions
- Mediumsource verified
Load only 1 sheet at a time in the manual feed slot, and never use tools or sharp instruments to remove jammed media.
Evidence: Xerox B215 Multifunction Printer User Guide - Paper Jams · Xerox B215 - Fault Code Information · Xerox B215 - Fault Code 07-530: Jam in the Bypass Tray Message (Manual Feed Slot) · Xerox B215 - Paper Jam in the Manual Feed Slot
- Highsource verified
When opening the front cover or printing with the rear cover open to prevent curl over 20 mm (0.8 in.), use caution because the fuser area inside becomes very hot.
Evidence: Xerox B215 Multifunction Printer User Guide - Paper Jams · Xerox B215 - Fault Code Information · Xerox B215 - Fault Code 07-530: Jam in the Bypass Tray Message (Manual Feed Slot) · Xerox B215 - Paper Jam in the Manual Feed Slot
Symptoms and causes
Probable causes · in order
- Loading more than 1 sheet or envelope at a time in the manual feed slotCommon
The Xerox B215 manual feed slot holds only 1 sheet of print media at a time; feeding multiple sheets together blocks the entry path and triggers fault code 07-530.
Evidence: Xerox B215 Multifunction Printer User Guide - Paper Jams · Xerox B215 - Fault Code Information · Xerox B215 - Fault Code 07-530: Jam in the Bypass Tray Message (Manual Feed Slot) · Xerox B215 - Paper Jam in the Manual Feed Slot
- Manual feed slot width guides not resting against the media edgesPossible
Failing to adjust the manual feed slot paper guides to the width of the sheet or pushing the media past the point where the printer takes hold causes the sheet to skew and jam.
Evidence: Xerox B215 Multifunction Printer User Guide - Paper Jams · Xerox B215 - Fault Code Information · Xerox B215 - Fault Code 07-530: Jam in the Bypass Tray Message (Manual Feed Slot) · Xerox B215 - Paper Jam in the Manual Feed Slot
- Curled envelopes or specialty media outside the 60 to 220 g/m2 specificationPossible
Feeding envelopes without flattening curl first, or using sizes outside 76 x 127 mm to 216 x 356 mm (3.0 x 5.0 in. to 8.5 x 14 in.) or weights outside 60 to 220 g/m2 (16 to 58 lb), causes misfeeds.
Evidence: Xerox B215 Multifunction Printer User Guide - Paper Jams · Xerox B215 - Fault Code Information · Xerox B215 - Fault Code 07-530: Jam in the Bypass Tray Message (Manual Feed Slot) · Xerox B215 - Paper Jam in the Manual Feed Slot
- Paper source, size, or type not set to Manual Feed Slot in the driverLess common
Sending a print job without selecting Manual Feed Slot as the source and matching the exact paper size and type prevents proper feed timing for specialty media.
Evidence: Xerox B215 Multifunction Printer User Guide - Paper Jams · Xerox B215 - Fault Code Information · Xerox B215 - Fault Code 07-530: Jam in the Bypass Tray Message (Manual Feed Slot) · Xerox B215 - Paper Jam in the Manual Feed Slot
Virtual technician
Does 07-530 still appear after these checks?
Answer a few questions to narrow down the likely cause and the safest next action. Guidance only - it never replaces a professional.
Sources and technical references
- 1
Xerox B215 Multifunction Printer User Guide - Paper Jams
Xerox · 2020 · official_doc
- 2
Equipo multifunción Xerox B215 Guía del usuario - Atascos de papel
Xerox · 2020 · official_doc
- 3
Xerox B215 - Fault Code Information
Xerox Support · 2020 · official_doc
- 4
Xerox B215 - Información de código de error
Asistencia Xerox · 2020 · official_doc
- 5
Xerox B215 - Fault Code 07-530: Jam in the Bypass Tray Message (Manual Feed Slot)
Xerox Support · 2019 · official_doc
- 6
Asistencia Xerox · 2019 · official_doc
- 7
Xerox B215 - Paper Jam in the Manual Feed Slot
Xerox Support · 2020 · official_doc
- 8
Xerox B215 - Atasco de papel en la ranura de alimentación manual
Asistencia Xerox · 2020 · official_doc
Was this entry useful?